diff options
34 files changed, 3730 insertions, 0 deletions
diff --git a/crypto/openssh/README.tun b/crypto/openssh/README.tun new file mode 100644 index 000000000000..5e1cb074c2ee --- /dev/null +++ b/crypto/openssh/README.tun @@ -0,0 +1,132 @@ +How to use OpenSSH-based virtual private networks +------------------------------------------------- + +OpenSSH contains support for VPN tunneling using the tun(4) network +tunnel pseudo-device which is available on most platforms, either for +layer 2 or 3 traffic. + +The following brief instructions on how to use this feature use +a network configuration specific to the OpenBSD operating system. + +(1) Server: Enable support for SSH tunneling + +To enable the ssh server to accept tunnel requests from the client, you +have to add the following option to the ssh server configuration file +(/etc/ssh/sshd_config): + + PermitTunnel yes + +Restart the server or send the hangup signal (SIGHUP) to let the server +reread it's configuration. + +(2) Server: Restrict client access and assign the tunnel + +The OpenSSH server simply uses the file /root/.ssh/authorized_keys to +restrict the client to connect to a specified tunnel and to +automatically start the related interface configuration command. These +settings are optional but recommended: + + tunnel="1",command="sh /etc/netstart tun1" ssh-rsa ... reyk@openbsd.org + +(3) Client: Configure the local network tunnel interface + +Use the hostname.if(5) interface-specific configuration file to set up +the network tunnel configuration with OpenBSD. For example, use the +following configuration in /etc/hostname.tun0 to set up the layer 3 +tunnel on the client: + + inet 192.168.5.1 255.255.255.252 192.168.5.2 + +OpenBSD also supports layer 2 tunneling over the tun device by adding +the link0 flag: + + inet 192.168.1.78 255.255.255.0 192.168.1.255 link0 + +Layer 2 tunnels can be used in combination with an Ethernet bridge(4) +interface, like the following example for /etc/bridgename.bridge0: + + add tun0 + add sis0 + up + +(4) Client: Configure the OpenSSH client + +To establish tunnel forwarding for connections to a specified +remote host by default, use the following ssh client configuration for +the privileged user (in /root/.ssh/config): + + Host sshgateway + Tunnel yes + TunnelDevice 0:any + PermitLocalCommand yes + LocalCommand sh /etc/netstart tun0 + +A more complicated configuration is possible to establish a tunnel to +a remote host which is not directly accessible by the client. +The following example describes a client configuration to connect to +the remote host over two ssh hops in between. It uses the OpenSSH +ProxyCommand in combination with the nc(1) program to forward the final +ssh tunnel destination over multiple ssh sessions. + + Host access.somewhere.net + User puffy + Host dmzgw + User puffy + ProxyCommand ssh access.somewhere.net nc dmzgw 22 + Host sshgateway + Tunnel Ethernet + TunnelDevice 0:any + PermitLocalCommand yes + LocalCommand sh /etc/netstart tun0 + ProxyCommand ssh dmzgw nc sshgateway 22 + +The following network plan illustrates the previous configuration in +combination with layer 2 tunneling and Ethernet bridging. + ++--------+ ( ) +----------------------+ +| Client |------( Internet )-----| access.somewhere.net | ++--------+ ( ) +----------------------+ + : 192.168.1.78 | + :............................. +-------+ + Forwarded ssh connection : | dmzgw | + Layer 2 tunnel : +-------+ + : | + : | + : +------------+ + :......| sshgateway | + | +------------+ +--- real connection Bridge -> | +----------+ +... "virtual connection" [ X ]--------| somehost | +[X] switch +----------+ + 192.168.1.25 + +(5) Client: Connect to the server and establish the tunnel + +Finally connect to the OpenSSH server to establish the tunnel by using +the following command: + + ssh sshgateway + +It is also possible to tell the client to fork into the background after +the connection has been successfully established: + + ssh -f sshgateway true + +Without the ssh configuration done in step (4), it is also possible +to use the following command lines: + + ssh -fw 0:1 sshgateway true + ifconfig tun0 192.168.5.1 192.168.5.2 netmask 255.255.255.252 + +Using OpenSSH tunnel forwarding is a simple way to establish secure +and ad hoc virtual private networks. Possible fields of application +could be wireless networks or administrative VPN tunnels. + +Nevertheless, ssh tunneling requires some packet header overhead and +runs on top of TCP. It is still suggested to use the IP Security +Protocol (IPSec) for robust and permanent VPN connections and to +interconnect corporate networks. + + Reyk Floeter + +$OpenBSD: README.tun,v 1.4 2006/03/28 00:12:31 deraadt Exp $ diff --git a/crypto/openssh/bufbn.c b/crypto/openssh/bufbn.c new file mode 100644 index 000000000000..6cf65d372ef6 --- /dev/null +++ b/crypto/openssh/bufbn.c @@ -0,0 +1,215 @@ +/* $OpenBSD: bufbn.c,v 1.3 2006/08/03 03:34:41 deraadt Exp $*/ +/* + * Author: Tatu Ylonen <ylo@cs.hut.fi> + * Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland + * All rights reserved + * Auxiliary functions for storing and retrieving various data types to/from + * Buffers. + * + * As far as I am concerned, the code I have written for this software + * can be used freely for any purpose. Any derived versions of this + * software must be clearly marked as such, and if the derived work is + * incompatible with the protocol description in the RFC file, it must be + * called by a name other than "ssh" or "Secure Shell". + * + * + * SSH2 packet format added by Markus Friedl + * Copyright (c) 2000 Markus Friedl. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "includes.h" + +#include <sys/types.h> + +#include <openssl/bn.h> + +#include <string.h> +#include <stdarg.h> + +#include "xmalloc.h" +#include "buffer.h" +#include "log.h" +#include "misc.h" + +/* + * Stores an BIGNUM in the buffer with a 2-byte msb first bit count, followed + * by (bits+7)/8 bytes of binary data, msb first. + */ +int +buffer_put_bignum_ret(Buffer *buffer, const BIGNUM *value) +{ + int bits = BN_num_bits(value); + int bin_size = (bits + 7) / 8; + u_char *buf = xmalloc(bin_size); + int oi; + char msg[2]; + + /* Get the value of in binary */ + oi = BN_bn2bin(value, buf); + if (oi != bin_size) { + error("buffer_put_bignum_ret: BN_bn2bin() failed: oi %d != bin_size %d", + oi, bin_size); + xfree(buf); + return (-1); + } + + /* Store the number of bits in the buffer in two bytes, msb first. */ + put_u16(msg, bits); + buffer_append(buffer, msg, 2); + /* Store the binary data. */ + buffer_append(buffer, buf, oi); + + memset(buf, 0, bin_size); + xfree(buf); + + return (0); +} + +void +buffer_put_bignum(Buffer *buffer, const BIGNUM *value) +{ + if (buffer_put_bignum_ret(buffer, value) == -1) + fatal("buffer_put_bignum: buffer error"); +} + +/* + * Retrieves an BIGNUM from the buffer. + */ +int +buffer_get_bignum_ret(Buffer *buffer, BIGNUM *value) +{ + u_int bits, bytes; + u_char buf[2], *bin; + + /* Get the number for bits. */ + if (buffer_get_ret(buffer, (char *) buf, 2) == -1) { + error("buffer_get_bignum_ret: invalid length"); + return (-1); + } + bits = get_u16(buf); + /* Compute the number of binary bytes that follow. */ + bytes = (bits + 7) / 8; + if (bytes > 8 * 1024) { + error("buffer_get_bignum_ret: cannot handle BN of size %d", bytes); + return (-1); + } + if (buffer_len(buffer) < bytes) { + error("buffer_get_bignum_ret: input buffer too small"); + return (-1); + } + bin = buffer_ptr(buffer); + BN_bin2bn(bin, bytes, value); + if (buffer_consume_ret(buffer, bytes) == -1) { + error("buffer_get_bignum_ret: buffer_consume failed"); + return (-1); + } + return (0); +} + +void +buffer_get_bignum(Buffer *buffer, BIGNUM *value) +{ + if (buffer_get_bignum_ret(buffer, value) == -1) + fatal("buffer_get_bignum: buffer error"); +} + +/* + * Stores an BIGNUM in the buffer in SSH2 format. + */ +int +buffer_put_bignum2_ret(Buffer *buffer, const BIGNUM *value) +{ + u_int bytes; + u_char *buf; + int oi; + u_int hasnohigh = 0; + + if (BN_is_zero(value)) { + buffer_put_int(buffer, 0); + return 0; + } + if (value->neg) { + error("buffer_put_bignum2_ret: negative numbers not supported"); + return (-1); + } + bytes = BN_num_bytes(value) + 1; /* extra padding byte */ + if (bytes < 2) { + error("buffer_put_bignum2_ret: BN too small"); + return (-1); + } + buf = xmalloc(bytes); + buf[0] = 0x00; + /* Get the value of in binary */ + oi = BN_bn2bin(value, buf+1); + if (oi < 0 || (u_int)oi != bytes - 1) { + error("buffer_put_bignum2_ret: BN_bn2bin() failed: " + "oi %d != bin_size %d", oi, bytes); + xfree(buf); + return (-1); + } + hasnohigh = (buf[1] & 0x80) ? 0 : 1; + buffer_put_string(buffer, buf+hasnohigh, bytes-hasnohigh); + memset(buf, 0, bytes); + xfree(buf); + return (0); +} + +void +buffer_put_bignum2(Buffer *buffer, const BIGNUM *value) +{ + if (buffer_put_bignum2_ret(buffer, value) == -1) + fatal("buffer_put_bignum2: buffer error"); +} + +int +buffer_get_bignum2_ret(Buffer *buffer, BIGNUM *value) +{ + u_int len; + u_char *bin; + + if ((bin = buffer_get_string_ret(buffer, &len)) == NULL) { + error("buffer_get_bignum2_ret: invalid bignum"); + return (-1); + } + + if (len > 0 && (bin[0] & 0x80)) { + error("buffer_get_bignum2_ret: negative numbers not supported"); + xfree(bin); + return (-1); + } + if (len > 8 * 1024) { + error("buffer_get_bignum2_ret: cannot handle BN of size %d", len); + xfree(bin); + return (-1); + } + BN_bin2bn(bin, len, value); + xfree(bin); + return (0); +} + +void +buffer_get_bignum2(Buffer *buffer, BIGNUM *value) +{ + if (buffer_get_bignum2_ret(buffer, value) == -1) + fatal("buffer_get_bignum2: buffer error"); +} diff --git a/crypto/openssh/md-sha256.c b/crypto/openssh/md-sha256.c new file mode 100644 index 000000000000..8c1b3b92da9b --- /dev/null +++ b/crypto/openssh/md-sha256.c @@ -0,0 +1,86 @@ +/* $OpenBSD: md-sha256.c,v 1.5 2006/08/03 03:34:42 deraadt Exp $ */ +/* + * Copyright (c) 2005 Damien Miller <djm@openbsd.org> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +/* EVP wrapper for SHA256 */ + +#include "includes.h" + +#include <sys/types.h> +#include <openssl/opensslv.h> + +#if !defined(HAVE_EVP_SHA256) && (OPENSSL_VERSION_NUMBER >= 0x00907000L) + +#include <string.h> +#include <openssl/evp.h> +#ifdef HAVE_SHA256_UPDATE +# ifdef HAVE_SHA2_H +# include <sha2.h> +# elif defined(HAVE_CRYPTO_SHA2_H) +# include <crypto/sha2.h> +# endif +#endif + +const EVP_MD *evp_ssh_sha256(void); + +static int +ssh_sha256_init(EVP_MD_CTX *ctxt) +{ + SHA256_Init(ctxt->md_data); + return (1); +} + +static int +ssh_sha256_update(EVP_MD_CTX *ctxt, const void *data, unsigned long len) +{ + SHA256_Update(ctxt->md_data, data, len); + return (1); +} + +static int +ssh_sha256_final(EVP_MD_CTX *ctxt, unsigned char *digest) +{ + SHA256_Final(digest, ctxt->md_data); + return (1); +} + +static int +ssh_sha256_cleanup(EVP_MD_CTX *ctxt) +{ + memset(ctxt->md_data, 0, sizeof(SHA256_CTX)); + return (1); +} + +const EVP_MD * +evp_ssh_sha256(void) +{ + static EVP_MD ssh_sha256; + + memset(&ssh_sha256, 0, sizeof(ssh_sha256)); + ssh_sha256.type = NID_undef; + ssh_sha256.md_size = SHA256_DIGEST_LENGTH; + ssh_sha256.init = ssh_sha256_init; + ssh_sha256.update = ssh_sha256_update; + ssh_sha256.final = ssh_sha256_final; + ssh_sha256.cleanup = ssh_sha256_cleanup; + ssh_sha256.block_size = SHA256_BLOCK_LENGTH; + ssh_sha256.ctx_size = sizeof(SHA256_CTX); + + return (&ssh_sha256); +} + +#endif /* !defined(HAVE_EVP_SHA256) && (OPENSSL_VERSION_NUMBER >= 0x00907000L) */ + diff --git a/crypto/openssh/openbsd-compat/bsd-asprintf.c b/crypto/openssh/openbsd-compat/bsd-asprintf.c new file mode 100644 index 000000000000..67480139ebdf --- /dev/null +++ b/crypto/openssh/openbsd-compat/bsd-asprintf.c @@ -0,0 +1,99 @@ +/* + * Copyright (c) 2004 Darren Tucker. + * + * Based originally on asprintf.c from OpenBSD: + * Copyright (c) 1997 Todd C. Miller <Todd.Miller@courtesan.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include "includes.h" + +#ifndef HAVE_VASPRINTF + +#include <errno.h> +#include <stdarg.h> +#include <stdlib.h> + +#ifndef VA_COPY +# ifdef HAVE_VA_COPY +# define VA_COPY(dest, src) va_copy(dest, src) +# else +# ifdef HAVE___VA_COPY +# define VA_COPY(dest, src) __va_copy(dest, src) +# else +# define VA_COPY(dest, src) (dest) = (src) +# endif +# endif +#endif + +#define INIT_SZ 128 + +int vasprintf(char **str, const char *fmt, va_list ap) +{ + int ret = -1; + va_list ap2; + char *string, *newstr; + size_t len; + + VA_COPY(ap2, ap); + if ((string = malloc(INIT_SZ)) == NULL) + goto fail; + + ret = vsnprintf(string, INIT_SZ, fmt, ap2); + if (ret >= 0 && ret < INIT_SZ) { /* succeeded with initial alloc */ + *str = string; + } else if (ret == INT_MAX) { /* shouldn't happen */ + goto fail; + } else { /* bigger than initial, realloc allowing for nul */ + len = (size_t)ret + 1; + if ((newstr = realloc(string, len)) == NULL) { + free(string); + goto fail; + } else { + va_end(ap2); + VA_COPY(ap2, ap); + ret = vsnprintf(newstr, len, fmt, ap2); + if (ret >= 0 && (size_t)ret < len) { + *str = newstr; + } else { /* failed with realloc'ed string, give up */ + free(newstr); + goto fail; + } + } + } + va_end(ap2); + return (ret); + +fail: + *str = NULL; + errno = ENOMEM; + va_end(ap2); + return (-1); +} +#endif + +#ifndef HAVE_ASPRINTF +int asprintf(char **str, const char *fmt, ...) +{ + va_list ap; + int ret; + + *str = NULL; + va_start(ap, fmt); + ret = vasprintf(str, fmt, ap); + va_end(ap); + + return ret; +} +#endif diff --git a/crypto/openssh/openbsd-compat/port-linux.c b/crypto/openssh/openbsd-compat/port-linux.c new file mode 100644 index 000000000000..77f3a1c1797c --- /dev/null +++ b/crypto/openssh/openbsd-compat/port-linux.c @@ -0,0 +1,169 @@ +/* $Id: port-linux.c,v 1.3 2006/09/01 05:38:41 djm Exp $ */ + +/* + * Copyright (c) 2005 Daniel Walsh <dwalsh@redhat.com> + * Copyright (c) 2006 Damien Miller <djm@openbsd.org> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +/* + * Linux-specific portability code - just SELinux support at present + */ + +#include "includes.h" + +#include <errno.h> +#include <stdarg.h> +#include <string.h> + +#ifdef WITH_SELINUX +#include "log.h" +#include "port-linux.h" + +#include <selinux/selinux.h> +#include <selinux/flask.h> +#include <selinux/get_context_list.h> + +/* Wrapper around is_selinux_enabled() to log its return value once only */ +static int +ssh_selinux_enabled(void) +{ + static int enabled = -1; + + if (enabled == -1) { + enabled = is_selinux_enabled(); + debug("SELinux support %s", enabled ? "enabled" : "disabled"); + } + + return (enabled); +} + +/* Return the default security context for the given username */ +static security_context_t +ssh_selinux_getctxbyname(char *pwname) +{ + security_context_t sc; + char *sename = NULL, *lvl = NULL; + int r; + +#ifdef HAVE_GETSEUSERBYNAME + if (getseuserbyname(pwname, &sename, &lvl) != 0) + return NULL; +#else + sename = pwname; + lvl = NULL; +#endif + +#ifdef HAVE_GET_DEFAULT_CONTEXT_WITH_LEVEL + r = get_default_context_with_level(sename, lvl, NULL, &sc); +#else + r = get_default_context(sename, NULL, &sc); +#endif + + if (r != 0) { + switch (security_getenforce()) { + case -1: + fatal("%s: ssh_selinux_getctxbyname: " + "security_getenforce() failed", __func__); + case 0: + error("%s: Failed to get default SELinux security " + "context for %s", __func__, pwname); + default: + fatal("%s: Failed to get default SELinux security " + "context for %s (in enforcing mode)", + __func__, pwname); + } + } + +#ifdef HAVE_GETSEUSERBYNAME + if (sename != NULL) + xfree(sename); + if (lvl != NULL) + xfree(lvl); +#endif + + return (sc); +} + +/* Set the execution context to the default for the specified user */ +void +ssh_selinux_setup_exec_context(char *pwname) +{ + security_context_t user_ctx = NULL; + + if (!ssh_selinux_enabled()) + return; + + debug3("%s: setting execution context", __func__); + + user_ctx = ssh_selinux_getctxbyname(pwname); + if (setexeccon(user_ctx) != 0) { + switch (security_getenforce()) { + case -1: + fatal("%s: security_getenforce() failed", __func__); + case 0: + error("%s: Failed to set SELinux execution " + "context for %s", __func__, pwname); + default: + fatal("%s: Failed to set SELinux execution context " + "for %s (in enforcing mode)", __func__, pwname); + } + } + if (user_ctx != NULL) + freecon(user_ctx); + + debug3("%s: done", __func__); +} + +/* Set the TTY context for the specified user */ +void +ssh_selinux_setup_pty(char *pwname, const char *tty) +{ + security_context_t new_tty_ctx = NULL; + security_context_t user_ctx = NULL; + security_context_t old_tty_ctx = NULL; + + if (!ssh_selinux_enabled()) + return; + + debug3("%s: setting TTY context on %s", __func__, tty); + + user_ctx = ssh_selinux_getctxbyname(pwname); + + /* XXX: should these calls fatal() upon failure in enforcing mode? */ + + if (getfilecon(tty, &old_tty_ctx) == -1) { + error("%s: getfilecon: %s", __func__, strerror(errno)); + goto out; + } + + if (security_compute_relabel(user_ctx, old_tty_ctx, + SECCLASS_CHR_FILE, &new_tty_ctx) != 0) { + error("%s: security_compute_relabel: %s", + __func__, strerror(errno)); + goto out; + } + + if (setfilecon(tty, new_tty_ctx) != 0) + error("%s: setfilecon: %s", __func__, strerror(errno)); + out: + if (new_tty_ctx != NULL) + freecon(new_tty_ctx); + if (old_tty_ctx != NULL) + freecon(old_tty_ctx); + if (user_ctx != NULL) + freecon(user_ctx); + debug3("%s: done", __func__); +} +#endif /* WITH_SELINUX */ diff --git a/crypto/openssh/openbsd-compat/port-linux.h b/crypto/openssh/openbsd-compat/port-linux.h new file mode 100644 index 000000000000..05e520e1c2fa --- /dev/null +++ b/crypto/openssh/openbsd-compat/port-linux.h @@ -0,0 +1,27 @@ +/* $Id: port-linux.h,v 1.1 2006/04/22 11:26:08 djm Exp $ */ + +/* + * Copyright (c) 2006 Damien Miller <djm@openbsd.org> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _PORT_LINUX_H +#define _PORT_LINUX_H + +#ifdef WITH_SELINUX +void ssh_selinux_setup_pty(char *, const char *); +void ssh_selinux_setup_exec_context(char *); +#endif + +#endif /* ! _PORT_LINUX_H */ diff --git a/crypto/openssh/openbsd-compat/port-solaris.c b/crypto/openssh/openbsd-compat/port-solaris.c new file mode 100644 index 000000000000..f57433e78f3b --- /dev/null +++ b/crypto/openssh/openbsd-compat/port-solaris.c @@ -0,0 +1,190 @@ +/* $Id: port-solaris.c,v 1.2 2006/09/01 05:38:41 djm Exp $ */ + +/* + * Copyright (c) 2006 Chad Mynhier. + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include "config.h" +#include "includes.h" + +#ifdef USE_SOLARIS_PROCESS_CONTRACTS + +#include <sys/types.h> +#include <sys/stat.h> +#include <sys/param.h> + +#include <errno.h> +#ifdef HAVE_FCNTL_H +# include <fcntl.h> +#endif +#include <stdarg.h> +#include <string.h> +#include <unistd.h> + +#include <libcontract.h> +#include <sys/contract/process.h> +#include <sys/ctfs.h> + +#include "log.h" + +#define CT_TEMPLATE CTFS_ROOT "/process/template" +#define CT_LATEST CTFS_ROOT "/process/latest" + +static int tmpl_fd = -1; + +/* Lookup the latest process contract */ +static ctid_t +get_active_process_contract_id(void) +{ + int stat_fd; + ctid_t ctid = -1; + ct_stathdl_t stathdl; + + if ((stat_fd = open64(CT_LATEST, O_RDONLY)) == -1) { + error("%s: Error opening 'latest' process " + "contract: %s", __func__, strerror(errno)); + return -1; + } + if (ct_status_read(stat_fd, CTD_COMMON, &stathdl) != 0) { + error("%s: Error reading process contract " + "status: %s", __func__, strerror(errno)); + goto out; + } + if ((ctid = ct_status_get_id(stathdl)) < 0) { + error("%s: Error getting process contract id: %s", + __func__, strerror(errno)); + goto out; + } + + ct_status_free(stathdl); + out: + close(stat_fd); + return ctid; +} + +void +solaris_contract_pre_fork(void) +{ + if ((tmpl_fd = open64(CT_TEMPLATE, O_RDWR)) == -1) { + error("%s: open %s: %s", __func__, + CT_TEMPLATE, strerror(errno)); + return; + } + + debug2("%s: setting up process contract template on fd %d", + __func__, tmpl_fd); + + /* We have to set certain attributes before activating the template */ + if (ct_pr_tmpl_set_fatal(tmpl_fd, + CT_PR_EV_HWERR|CT_PR_EV_SIGNAL|CT_PR_EV_CORE) != 0) { + error("%s: Error setting process contract template " + "fatal events: %s", __func__, strerror(errno)); + goto fail; + } + if (ct_tmpl_set_critical(tmpl_fd, CT_PR_EV_HWERR) != 0) { + error("%s: Error setting process contract template " + "critical events: %s", __func__, strerror(errno)); + goto fail; + } + + /* Now make this the active template for this process. */ + if (ct_tmpl_activate(tmpl_fd) != 0) { + error("%s: Error activating process contract " + "template: %s", __func__, strerror(errno)); + goto fail; + } + return; + + fail: + if (tmpl_fd != -1) { + close(tmpl_fd); + tmpl_fd = -1; + } +} + +void +solaris_contract_post_fork_child() +{ + debug2("%s: clearing process contract template on fd %d", + __func__, tmpl_fd); + + /* Clear the active template. */ + if (ct_tmpl_clear(tmpl_fd) != 0) + error("%s: Error clearing active process contract " + "template: %s", __func__, strerror(errno)); + + close(tmpl_fd); + tmpl_fd = -1; +} + +void +solaris_contract_post_fork_parent(pid_t pid) +{ + ctid_t ctid; + char ctl_path[256]; + int r, ctl_fd = -1, stat_fd = -1; + + debug2("%s: clearing template (fd %d)", __func__, tmpl_fd); + + if (tmpl_fd == -1) + return; + + /* First clear the active template. */ + if ((r = ct_tmpl_clear(tmpl_fd)) != 0) + error("%s: Error clearing active process contract " + "template: %s", __func__, strerror(errno)); + + close(tmpl_fd); + tmpl_fd = -1; + + /* + * If either the fork didn't succeed (pid < 0), or clearing + * th active contract failed (r != 0), then we have nothing + * more do. + */ + if (r != 0 || pid <= 0) + return; + + /* Now lookup and abandon the contract we've created. */ + ctid = get_active_process_contract_id(); + + debug2("%s: abandoning contract id %ld", __func__, ctid); + + snprintf(ctl_path, sizeof(ctl_path), + CTFS_ROOT "/process/%ld/ctl", ctid); + if ((ctl_fd = open64(ctl_path, O_WRONLY)) < 0) { + error("%s: Error opening process contract " + "ctl file: %s", __func__, strerror(errno)); + goto fail; + } + if (ct_ctl_abandon(ctl_fd) < 0) { + error("%s: Error abandoning process contract: %s", + __func__, strerror(errno)); + goto fail; + } + close(ctl_fd); + return; + + fail: + if (tmpl_fd != -1) { + close(tmpl_fd); + tmpl_fd = -1; + } + if (stat_fd != -1) + close(stat_fd); + if (ctl_fd != -1) + close(ctl_fd); +} +#endif diff --git a/crypto/openssh/openbsd-compat/port-solaris.h b/crypto/openssh/openbsd-compat/port-solaris.h new file mode 100644 index 000000000000..4c324871eb19 --- /dev/null +++ b/crypto/openssh/openbsd-compat/port-solaris.h @@ -0,0 +1,27 @@ +/* $Id: port-solaris.h,v 1.1 2006/08/30 17:24:42 djm Exp $ */ + +/* + * Copyright (c) 2006 Chad Mynhier. + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _PORT_SOLARIS_H + +#include <sys/types.h> + +void solaris_contract_pre_fork(void); +void solaris_contract_post_fork_child(void); +void solaris_contract_post_fork_parent(pid_t pid); + +#endif diff --git a/crypto/openssh/openbsd-compat/port-tun.c b/crypto/openssh/openbsd-compat/port-tun.c new file mode 100644 index 000000000000..276474db87cd --- /dev/null +++ b/crypto/openssh/openbsd-compat/port-tun.c @@ -0,0 +1,270 @@ +/* + * Copyright (c) 2005 Reyk Floeter <reyk@openbsd.org> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include "includes.h" + +#include <sys/types.h> +#include <sys/ioctl.h> + +#include <netinet/in.h> +#include <arpa/inet.h> +#include <netinet/ip.h> + +#include <errno.h> +#include <fcntl.h> +#include <stdarg.h> +#include <string.h> +#include <unistd.h> + +#include "log.h" +#include "misc.h" +#include "buffer.h" +#include "channels.h" + +/* + * This is the portable version of the SSH tunnel forwarding, it + * uses some preprocessor definitions for various platform-specific + * settings. + * + * SSH_TUN_LINUX Use the (newer) Linux tun/tap device + * SSH_TUN_FREEBSD Use the FreeBSD tun/tap device + * SSH_TUN_COMPAT_AF Translate the OpenBSD address family + * SSH_TUN_PREPEND_AF Prepend/remove the address family + */ + +/* + * System-specific tunnel open function + */ + +#if defined(SSH_TUN_LINUX) +#include <linux/if.h> +#include <linux/if_tun.h> + +int +sys_tun_open(int tun, int mode) +{ + struct ifreq ifr; + int fd = -1; + const char *name = NULL; + + if ((fd = open("/dev/net/tun", O_RDWR)) == -1) { + debug("%s: failed to open tunnel control interface: %s", + __func__, strerror(errno)); + return (-1); + } + + bzero(&ifr, sizeof(ifr)); + + if (mode == SSH_TUNMODE_ETHERNET) { + ifr.ifr_flags = IFF_TAP; + name = "tap%d"; + } else { + ifr.ifr_flags = IFF_TUN; + name = "tun%d"; + } + ifr.ifr_flags |= IFF_NO_PI; + + if (tun != SSH_TUNID_ANY) { + if (tun > SSH_TUNID_MAX) { + debug("%s: invalid tunnel id %x: %s", __func__, + tun, strerror(errno)); + goto failed; + } + snprintf(ifr.ifr_name, sizeof(ifr.ifr_name), name, tun); + } + + if (ioctl(fd, TUNSETIFF, &ifr) == -1) { + debug("%s: failed to configure tunnel (mode %d): %s", __func__, + mode, strerror(errno)); + goto failed; + } + + if (tun == SSH_TUNID_ANY) + debug("%s: tunnel mode %d fd %d", __func__, mode, fd); + else + debug("%s: %s mode %d fd %d", __func__, ifr.ifr_name, mode, fd); + + return (fd); + + failed: + close(fd); + return (-1); +} +#endif /* SSH_TUN_LINUX */ + +#ifdef SSH_TUN_FREEBSD +#include <sys/socket.h> +#include <net/if.h> + +#ifdef HAVE_NET_IF_TUN_H +#include <net/if_tun.h> +#endif + +int +sys_tun_open(int tun, int mode) +{ + struct ifreq ifr; + char name[100]; + int fd = -1, sock, flag; + const char *tunbase = "tun"; + + if (mode == SSH_TUNMODE_ETHERNET) { +#ifdef SSH_TUN_NO_L2 + debug("%s: no layer 2 tunnelling support", __func__); + return (-1); +#else + tunbase = "tap"; +#endif + } + + /* Open the tunnel device */ + if (tun <= SSH_TUNID_MAX) { + snprintf(name, sizeof(name), "/dev/%s%d", tunbase, tun); + fd = open(name, O_RDWR); + } else if (tun == SSH_TUNID_ANY) { + for (tun = 100; tun >= 0; tun--) { + snprintf(name, sizeof(name), "/dev/%s%d", + tunbase, tun); + if ((fd = open(name, O_RDWR)) >= 0) + break; + } + } else { + debug("%s: invalid tunnel %u\n", __func__, tun); + return (-1); + } + + if (fd < 0) { + debug("%s: %s open failed: %s", __func__, name, + strerror(errno)); + return (-1); + } + + /* Turn on tunnel headers */ + flag = 1; +#if defined(TUNSIFHEAD) && !defined(SSH_TUN_PREPEND_AF) + if (mode != SSH_TUNMODE_ETHERNET && + ioctl(fd, TUNSIFHEAD, &flag) == -1) { + debug("%s: ioctl(%d, TUNSIFHEAD, 1): %s", __func__, fd, + strerror(errno)); + close(fd); + } +#endif + + debug("%s: %s mode %d fd %d", __func__, name, mode, fd); + + /* Set the tunnel device operation mode */ + snprintf(ifr.ifr_name, sizeof(ifr.ifr_name), "%s%d", tunbase, tun); + if ((sock = socket(PF_UNIX, SOCK_STREAM, 0)) == -1) + goto failed; + + if (ioctl(sock, SIOCGIFFLAGS, &ifr) == -1) + goto failed; + ifr.ifr_flags |= IFF_UP; + if (ioctl(sock, SIOCSIFFLAGS, &ifr) == -1) + goto failed; + + close(sock); + return (fd); + + failed: + if (fd >= 0) + close(fd); + if (sock >= 0) + close(sock); + debug("%s: failed to set %s mode %d: %s", __func__, name, + mode, strerror(errno)); + return (-1); +} +#endif /* SSH_TUN_FREEBSD */ + +/* + * System-specific channel filters + */ + +#if defined(SSH_TUN_FILTER) +#define OPENBSD_AF_INET 2 +#define OPENBSD_AF_INET6 24 + +int +sys_tun_infilter(struct Channel *c, char *buf, int len) +{ +#if defined(SSH_TUN_PREPEND_AF) + char rbuf[CHAN_RBUF]; + struct ip *iph; +#endif + u_int32_t *af; + char *ptr = buf; + +#if defined(SSH_TUN_PREPEND_AF) + if (len <= 0 || len > (int)(sizeof(rbuf) - sizeof(*af))) + return (-1); + ptr = (char *)&rbuf[0]; + bcopy(buf, ptr + sizeof(u_int32_t), len); + len += sizeof(u_int32_t); + af = (u_int32_t *)ptr; + + iph = (struct ip *)(ptr + sizeof(u_int32_t)); + switch (iph->ip_v) { + case 6: + *af = AF_INET6; + break; + case 4: + default: + *af = AF_INET; + break; + } +#endif + +#if defined(SSH_TUN_COMPAT_AF) + if (len < (int)sizeof(u_int32_t)) + return (-1); + + af = (u_int32_t *)ptr; + if (*af == htonl(AF_INET6)) + *af = htonl(OPENBSD_AF_INET6); + else + *af = htonl(OPENBSD_AF_INET); +#endif + + buffer_put_string(&c->input, ptr, len); + return (0); +} + +u_char * +sys_tun_outfilter(struct Channel *c, u_char **data, u_int *dlen) +{ + u_char *buf; + u_int32_t *af; + + *data = buffer_get_string(&c->output, dlen); + if (*dlen < sizeof(*af)) + return (NULL); + buf = *data; + +#if defined(SSH_TUN_PREPEND_AF) + *dlen -= sizeof(u_int32_t); + buf = *data + sizeof(u_int32_t); +#elif defined(SSH_TUN_COMPAT_AF) + af = ntohl(*(u_int32_t *)buf); + if (*af == OPENBSD_AF_INET6) + *af = htonl(AF_INET6); + else + *af = htonl(AF_INET); +#endif + + return (buf); +} +#endif /* SSH_TUN_FILTER */ diff --git a/crypto/openssh/openbsd-compat/port-tun.h b/crypto/openssh/openbsd-compat/port-tun.h new file mode 100644 index 000000000000..c53df01fceb6 --- /dev/null +++ b/crypto/openssh/openbsd-compat/port-tun.h @@ -0,0 +1,33 @@ +/* + * Copyright (c) 2005 Reyk Floeter <reyk@openbsd.org> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _PORT_TUN_H +#define _PORT_TUN_H + +struct Channel; + +#if defined(SSH_TUN_LINUX) || defined(SSH_TUN_FREEBSD) +# define CUSTOM_SYS_TUN_OPEN +int sys_tun_open(int, int); +#endif + +#if defined(SSH_TUN_COMPAT_AF) || defined(SSH_TUN_PREPEND_AF) +# define SSH_TUN_FILTER +int sys_tun_infilter(struct Channel *, char *, int); +u_char *sys_tun_outfilter(struct Channel *, u_char **, u_int *); +#endif + +#endif diff --git a/crypto/openssh/openbsd-compat/regress/Makefile.in b/crypto/openssh/openbsd-compat/regress/Makefile.in new file mode 100644 index 000000000000..bcf214bd0217 --- /dev/null +++ b/crypto/openssh/openbsd-compat/regress/Makefile.in @@ -0,0 +1,38 @@ +# $Id: Makefile.in,v 1.4 2006/08/19 09:12:14 dtucker Exp $ + +sysconfdir=@sysconfdir@ +piddir=@piddir@ +srcdir=@srcdir@ +top_srcdir=@top_srcdir@ + +VPATH=@srcdir@ +CC=@CC@ +LD=@LD@ +CFLAGS=@CFLAGS@ +CPPFLAGS=-I. -I.. -I$(srcdir) -I$(srcdir)/.. @CPPFLAGS@ @DEFS@ +EXEEXT=@EXEEXT@ +LIBCOMPAT=../libopenbsd-compat.a +LIBS=@LIBS@ +LDFLAGS=@LDFLAGS@ $(LIBCOMPAT) + +TESTPROGS=closefromtest$(EXEEXT) snprintftest$(EXEEXT) strduptest$(EXEEXT) \ + strtonumtest$(EXEEXT) + +all: t-exec ${OTHERTESTS} + +%$(EXEEXT): %.c + $(CC) $(CFLAGS) $(CPPFLAGS) $(LDFLAGS) -o $@ $< $(LIBCOMPAT) $(LIBS) + +t-exec: $(TESTPROGS) + @echo running compat regress tests + @for TEST in ""$?; do \ + echo "run test $${TEST}" ... 1>&2; \ + ./$${TEST}$(EXEEXT) || exit $$? ; \ + done + @echo finished compat regress tests + +clean: + rm -f *.o *.a core $(TESTPROGS) valid.out + +distclean: clean + rm -f Makefile *~ diff --git a/crypto/openssh/openbsd-compat/regress/closefromtest.c b/crypto/openssh/openbsd-compat/regress/closefromtest.c new file mode 100644 index 000000000000..feb1b567df8c --- /dev/null +++ b/crypto/openssh/openbsd-compat/regress/closefromtest.c @@ -0,0 +1,60 @@ +/* + * Copyright (c) 2006 Darren Tucker + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include <sys/types.h> +#include <sys/stat.h> + +#include <fcntl.h> +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> + +#define NUM_OPENS 10 + +void +fail(char *msg) +{ + fprintf(stderr, "closefrom: %s\n", msg); + exit(1); +} + +int +main(void) +{ + int i, max, fds[NUM_OPENS]; + char buf[512]; + + for (i = 0; i < NUM_OPENS; i++) + if ((fds[i] = open("/dev/null", "r")) == -1) + exit(0); /* can't test */ + max = i - 1; + + /* should close last fd only */ + closefrom(fds[max]); + if (close(fds[max]) != -1) + fail("failed to close highest fd"); + + /* make sure we can still use remaining descriptors */ + for (i = 0; i < max; i++) + if (read(fds[i], buf, sizeof(buf)) == -1) + fail("closed descriptors it should not have"); + + /* should close all fds */ + closefrom(fds[0]); + for (i = 0; i < NUM_OPENS; i++) + if (close(fds[i]) != -1) + fail("failed to close from lowest fd"); +} diff --git a/crypto/openssh/openbsd-compat/regress/snprintftest.c b/crypto/openssh/openbsd-compat/regress/snprintftest.c new file mode 100644 index 000000000000..4ca63e18048c --- /dev/null +++ b/crypto/openssh/openbsd-compat/regress/snprintftest.c @@ -0,0 +1,73 @@ +/* + * Copyright (c) 2005 Darren Tucker + * Copyright (c) 2005 Damien Miller + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#define BUFSZ 2048 + +#include <sys/types.h> +#include <stdlib.h> +#include <stdio.h> +#include <stdarg.h> +#include <string.h> + +static int failed = 0; + +static void +fail(const char *m) +{ + fprintf(stderr, "snprintftest: %s\n", m); + failed = 1; +} + +int x_snprintf(char *str, size_t count, const char *fmt, ...) +{ + size_t ret; + va_list ap; + + va_start(ap, fmt); + ret = vsnprintf(str, count, fmt, ap); + va_end(ap); + return ret; +} + +int +main(void) +{ + char b[5]; + char *src; + + snprintf(b,5,"123456789"); + if (b[4] != '\0') + fail("snprintf does not correctly terminate long strings"); + + /* check for read overrun on unterminated string */ + if ((src = malloc(BUFSZ)) == NULL) { + fail("malloc failed"); + } else { + memset(src, 'a', BUFSZ); + snprintf(b, sizeof(b), "%.*s", 1, src); + if (strcmp(b, "a") != 0) + fail("failed with length limit '%%.s'"); + } + + /* check that snprintf and vsnprintf return sane values */ + if (snprintf(b, 1, "%s %d", "hello", 12345) != 11) + fail("snprintf does not return required length"); + if (x_snprintf(b, 1, "%s %d", "hello", 12345) != 11) + fail("vsnprintf does not return required length"); + + return failed; +} diff --git a/crypto/openssh/openbsd-compat/regress/strduptest.c b/crypto/openssh/openbsd-compat/regress/strduptest.c new file mode 100644 index 000000000000..7f6d779bedb3 --- /dev/null +++ b/crypto/openssh/openbsd-compat/regress/strduptest.c @@ -0,0 +1,45 @@ +/* + * Copyright (c) 2005 Darren Tucker + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include <stdlib.h> +#include <string.h> + +static int fail = 0; + +void +test(const char *a) +{ + char *b; + + b = strdup(a); + if (b == 0) { + fail = 1; + return; + } + if (strcmp(a, b) != 0) + fail = 1; + free(b); +} + +int +main(void) +{ + test(""); + test("a"); + test("\0"); + test("abcdefghijklmnopqrstuvwxyz"); + return fail; +} diff --git a/crypto/openssh/openbsd-compat/regress/strtonumtest.c b/crypto/openssh/openbsd-compat/regress/strtonumtest.c new file mode 100644 index 000000000000..cb85851291a0 --- /dev/null +++ b/crypto/openssh/openbsd-compat/regress/strtonumtest.c @@ -0,0 +1,66 @@ +/* $OpenBSD: strtonumtest.c,v 1.1 2004/08/03 20:38:36 otto Exp $ */ +/* + * Copyright (c) 2004 Otto Moerbeek <otto@drijf.net> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +/* OPENBSD ORIGINAL: regress/lib/libc/strtonum/strtonumtest.c */ + +#include <limits.h> +#include <stdio.h> +#include <stdlib.h> + +int fail; + +void +test(const char *p, long long lb, long long ub, int ok) +{ + long long val; + const char *q; + + val = strtonum(p, lb, ub, &q); + if (ok && q != NULL) { + fprintf(stderr, "%s [%lld-%lld] ", p, lb, ub); + fprintf(stderr, "NUMBER NOT ACCEPTED %s\n", q); + fail = 1; + } else if (!ok && q == NULL) { + fprintf(stderr, "%s [%lld-%lld] %lld ", p, lb, ub, val); + fprintf(stderr, "NUMBER ACCEPTED\n"); + fail = 1; + } +} + +int main(int argc, char *argv[]) +{ + test("1", 0, 10, 1); + test("0", -2, 5, 1); + test("0", 2, 5, 0); + test("0", 2, LLONG_MAX, 0); + test("-2", 0, LLONG_MAX, 0); + test("0", -5, LLONG_MAX, 1); + test("-3", -3, LLONG_MAX, 1); + test("-9223372036854775808", LLONG_MIN, LLONG_MAX, 1); + test("9223372036854775807", LLONG_MIN, LLONG_MAX, 1); + test("-9223372036854775809", LLONG_MIN, LLONG_MAX, 0); + test("9223372036854775808", LLONG_MIN, LLONG_MAX, 0); + test("1000000000000000000000000", LLONG_MIN, LLONG_MAX, 0); + test("-1000000000000000000000000", LLONG_MIN, LLONG_MAX, 0); + test("-2", 10, -1, 0); + test("-2", -10, -1, 1); + test("-20", -10, -1, 0); + test("20", -10, -1, 0); + + return (fail); +} + diff --git a/crypto/openssh/openbsd-compat/sha2.c b/crypto/openssh/openbsd-compat/sha2.c new file mode 100755 index 000000000000..cf8e0ad667ba --- /dev/null +++ b/crypto/openssh/openbsd-compat/sha2.c @@ -0,0 +1,882 @@ +/* $OpenBSD: sha2.c,v 1.11 2005/08/08 08:05:35 espie Exp $ */ + +/* + * FILE: sha2.c + * AUTHOR: Aaron D. Gifford <me@aarongifford.com> + * + * Copyright (c) 2000-2001, Aaron D. Gifford + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the copyright holder nor the names of contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTOR(S) ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTOR(S) BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $From: sha2.c,v 1.1 2001/11/08 00:01:51 adg Exp adg $ + */ + +/* OPENBSD ORIGINAL: lib/libc/hash/sha2.c */ + +#include "includes.h" + +#include <openssl/opensslv.h> + +#if !defined(HAVE_EVP_SHA256) && !defined(HAVE_SHA256_UPDATE) && \ + (OPENSSL_VERSION_NUMBER >= 0x00907000L) +#include <sys/types.h> +#include <string.h> +#include "sha2.h" + +/* + * UNROLLED TRANSFORM LOOP NOTE: + * You can define SHA2_UNROLL_TRANSFORM to use the unrolled transform + * loop version for the hash transform rounds (defined using macros + * later in this file). Either define on the command line, for example: + * + * cc -DSHA2_UNROLL_TRANSFORM -o sha2 sha2.c sha2prog.c + * + * or define below: + * + * #define SHA2_UNROLL_TRANSFORM + * + */ + +/*** SHA-256/384/512 Machine Architecture Definitions *****************/ +/* + * BYTE_ORDER NOTE: + * + * Please make sure that your system defines BYTE_ORDER. If your + * architecture is little-endian, make sure it also defines + * LITTLE_ENDIAN and that the two (BYTE_ORDER and LITTLE_ENDIAN) are + * equivilent. + * + * If your system does not define the above, then you can do so by + * hand like this: + * + * #define LITTLE_ENDIAN 1234 + * #define BIG_ENDIAN 4321 + * + * And for little-endian machines, add: + * + * #define BYTE_ORDER LITTLE_ENDIAN + * + * Or for big-endian machines: + * + * #define BYTE_ORDER BIG_ENDIAN + * + * The FreeBSD machine this was written on defines BYTE_ORDER + * appropriately by including <sys/types.h> (which in turn includes + * <machine/endian.h> where the appropriate definitions are actually + * made). + */ +#if !defined(BYTE_ORDER) || (BYTE_ORDER != LITTLE_ENDIAN && BYTE_ORDER != BIG_ENDIAN) +#error Define BYTE_ORDER to be equal to either LITTLE_ENDIAN or BIG_ENDIAN +#endif + + +/*** SHA-256/384/512 Various Length Definitions ***********************/ +/* NOTE: Most of these are in sha2.h */ +#define SHA256_SHORT_BLOCK_LENGTH (SHA256_BLOCK_LENGTH - 8) +#define SHA384_SHORT_BLOCK_LENGTH (SHA384_BLOCK_LENGTH - 16) +#define SHA512_SHORT_BLOCK_LENGTH (SHA512_BLOCK_LENGTH - 16) + +/*** ENDIAN SPECIFIC COPY MACROS **************************************/ +#define BE_8_TO_32(dst, cp) do { \ + (dst) = (u_int32_t)(cp)[3] | ((u_int32_t)(cp)[2] << 8) | \ + ((u_int32_t)(cp)[1] << 16) | ((u_int32_t)(cp)[0] << 24); \ +} while(0) + +#define BE_8_TO_64(dst, cp) do { \ + (dst) = (u_int64_t)(cp)[7] | ((u_int64_t)(cp)[6] << 8) | \ + ((u_int64_t)(cp)[5] << 16) | ((u_int64_t)(cp)[4] << 24) | \ + ((u_int64_t)(cp)[3] << 32) | ((u_int64_t)(cp)[2] << 40) | \ + ((u_int64_t)(cp)[1] << 48) | ((u_int64_t)(cp)[0] << 56); \ +} while (0) + +#define BE_64_TO_8(cp, src) do { \ + (cp)[0] = (src) >> 56; \ + (cp)[1] = (src) >> 48; \ + (cp)[2] = (src) >> 40; \ + (cp)[3] = (src) >> 32; \ + (cp)[4] = (src) >> 24; \ + (cp)[5] = (src) >> 16; \ + (cp)[6] = (src) >> 8; \ + (cp)[7] = (src); \ +} while (0) + +#define BE_32_TO_8(cp, src) do { \ + (cp)[0] = (src) >> 24; \ + (cp)[1] = (src) >> 16; \ + (cp)[2] = (src) >> 8; \ + (cp)[3] = (src); \ +} while (0) + +/* + * Macro for incrementally adding the unsigned 64-bit integer n to the + * unsigned 128-bit integer (represented using a two-element array of + * 64-bit words): + */ +#define ADDINC128(w,n) do { \ + (w)[0] += (u_int64_t)(n); \ + if ((w)[0] < (n)) { \ + (w)[1]++; \ + } \ +} while (0) + +/*** THE SIX LOGICAL FUNCTIONS ****************************************/ +/* + * Bit shifting and rotation (used by the six SHA-XYZ logical functions: + * + * NOTE: The naming of R and S appears backwards here (R is a SHIFT and + * S is a ROTATION) because the SHA-256/384/512 description document + * (see http://csrc.nist.gov/cryptval/shs/sha256-384-512.pdf) uses this + * same "backwards" definition. + */ +/* Shift-right (used in SHA-256, SHA-384, and SHA-512): */ +#define R(b,x) ((x) >> (b)) +/* 32-bit Rotate-right (used in SHA-256): */ +#define S32(b,x) (((x) >> (b)) | ((x) << (32 - (b)))) +/* 64-bit Rotate-right (used in SHA-384 and SHA-512): */ +#define S64(b,x) (((x) >> (b)) | ((x) << (64 - (b)))) + +/* Two of six logical functions used in SHA-256, SHA-384, and SHA-512: */ +#define Ch(x,y,z) (((x) & (y)) ^ ((~(x)) & (z))) +#define Maj(x,y,z) (((x) & (y)) ^ ((x) & (z)) ^ ((y) & (z))) + +/* Four of six logical functions used in SHA-256: */ +#define Sigma0_256(x) (S32(2, (x)) ^ S32(13, (x)) ^ S32(22, (x))) +#define Sigma1_256(x) (S32(6, (x)) ^ S32(11, (x)) ^ S32(25, (x))) +#define sigma0_256(x) (S32(7, (x)) ^ S32(18, (x)) ^ R(3 , (x))) +#define sigma1_256(x) (S32(17, (x)) ^ S32(19, (x)) ^ R(10, (x))) + +/* Four of six logical functions used in SHA-384 and SHA-512: */ +#define Sigma0_512(x) (S64(28, (x)) ^ S64(34, (x)) ^ S64(39, (x))) +#define Sigma1_512(x) (S64(14, (x)) ^ S64(18, (x)) ^ S64(41, (x))) +#define sigma0_512(x) (S64( 1, (x)) ^ S64( 8, (x)) ^ R( 7, (x))) +#define sigma1_512(x) (S64(19, (x)) ^ S64(61, (x)) ^ R( 6, (x))) + + +/*** SHA-XYZ INITIAL HASH VALUES AND CONSTANTS ************************/ +/* Hash constant words K for SHA-256: */ +const static u_int32_t K256[64] = { + 0x428a2f98UL, 0x71374491UL, 0xb5c0fbcfUL, 0xe9b5dba5UL, + 0x3956c25bUL, 0x59f111f1UL, 0x923f82a4UL, 0xab1c5ed5UL, + 0xd807aa98UL, 0x12835b01UL, 0x243185beUL, 0x550c7dc3UL, + 0x72be5d74UL, 0x80deb1feUL, 0x9bdc06a7UL, 0xc19bf174UL, + 0xe49b69c1UL, 0xefbe4786UL, 0x0fc19dc6UL, 0x240ca1ccUL, + 0x2de92c6fUL, 0x4a7484aaUL, 0x5cb0a9dcUL, 0x76f988daUL, + 0x983e5152UL, 0xa831c66dUL, 0xb00327c8UL, 0xbf597fc7UL, + 0xc6e00bf3UL, 0xd5a79147UL, 0x06ca6351UL, 0x14292967UL, + 0x27b70a85UL, 0x2e1b2138UL, 0x4d2c6dfcUL, 0x53380d13UL, + 0x650a7354UL, 0x766a0abbUL, 0x81c2c92eUL, 0x92722c85UL, + 0xa2bfe8a1UL, 0xa81a664bUL, 0xc24b8b70UL, 0xc76c51a3UL, + 0xd192e819UL, 0xd6990624UL, 0xf40e3585UL, 0x106aa070UL, + 0x19a4c116UL, 0x1e376c08UL, 0x2748774cUL, 0x34b0bcb5UL, + 0x391c0cb3UL, 0x4ed8aa4aUL, 0x5b9cca4fUL, 0x682e6ff3UL, + 0x748f82eeUL, 0x78a5636fUL, 0x84c87814UL, 0x8cc70208UL, + 0x90befffaUL, 0xa4506cebUL, 0xbef9a3f7UL, 0xc67178f2UL +}; + +/* Initial hash value H for SHA-256: */ +const static u_int32_t sha256_initial_hash_value[8] = { + 0x6a09e667UL, + 0xbb67ae85UL, + 0x3c6ef372UL, + 0xa54ff53aUL, + 0x510e527fUL, + 0x9b05688cUL, + 0x1f83d9abUL, + 0x5be0cd19UL +}; + +/* Hash constant words K for SHA-384 and SHA-512: */ +const static u_int64_t K512[80] = { + 0x428a2f98d728ae22ULL, 0x7137449123ef65cdULL, + 0xb5c0fbcfec4d3b2fULL, 0xe9b5dba58189dbbcULL, + 0x3956c25bf348b538ULL, 0x59f111f1b605d019ULL, + 0x923f82a4af194f9bULL, 0xab1c5ed5da6d8118ULL, + 0xd807aa98a3030242ULL, 0x12835b0145706fbeULL, + 0x243185be4ee4b28cULL, 0x550c7dc3d5ffb4e2ULL, + 0x72be5d74f27b896fULL, 0x80deb1fe3b1696b1ULL, + 0x9bdc06a725c71235ULL, 0xc19bf174cf692694ULL, + 0xe49b69c19ef14ad2ULL, 0xefbe4786384f25e3ULL, + 0x0fc19dc68b8cd5b5ULL, 0x240ca1cc77ac9c65ULL, + 0x2de92c6f592b0275ULL, 0x4a7484aa6ea6e483ULL, + 0x5cb0a9dcbd41fbd4ULL, 0x76f988da831153b5ULL, + 0x983e5152ee66dfabULL, 0xa831c66d2db43210ULL, + 0xb00327c898fb213fULL, 0xbf597fc7beef0ee4ULL, + 0xc6e00bf33da88fc2ULL, 0xd5a79147930aa725ULL, + 0x06ca6351e003826fULL, 0x142929670a0e6e70ULL, + 0x27b70a8546d22ffcULL, 0x2e1b21385c26c926ULL, + 0x4d2c6dfc5ac42aedULL, 0x53380d139d95b3dfULL, + 0x650a73548baf63deULL, 0x766a0abb3c77b2a8ULL, + 0x81c2c92e47edaee6ULL, 0x92722c851482353bULL, + 0xa2bfe8a14cf10364ULL, 0xa81a664bbc423001ULL, + 0xc24b8b70d0f89791ULL, 0xc76c51a30654be30ULL, + 0xd192e819d6ef5218ULL, 0xd69906245565a910ULL, + 0xf40e35855771202aULL, 0x106aa07032bbd1b8ULL, + 0x19a4c116b8d2d0c8ULL, 0x1e376c085141ab53ULL, + 0x2748774cdf8eeb99ULL, 0x34b0bcb5e19b48a8ULL, + 0x391c0cb3c5c95a63ULL, 0x4ed8aa4ae3418acbULL, + 0x5b9cca4f7763e373ULL, 0x682e6ff3d6b2b8a3ULL, + 0x748f82ee5defb2fcULL, 0x78a5636f43172f60ULL, + 0x84c87814a1f0ab72ULL, 0x8cc702081a6439ecULL, + 0x90befffa23631e28ULL, 0xa4506cebde82bde9ULL, + 0xbef9a3f7b2c67915ULL, 0xc67178f2e372532bULL, + 0xca273eceea26619cULL, 0xd186b8c721c0c207ULL, + 0xeada7dd6cde0eb1eULL, 0xf57d4f7fee6ed178ULL, + 0x06f067aa72176fbaULL, 0x0a637dc5a2c898a6ULL, + 0x113f9804bef90daeULL, 0x1b710b35131c471bULL, + 0x28db77f523047d84ULL, 0x32caab7b40c72493ULL, + 0x3c9ebe0a15c9bebcULL, 0x431d67c49c100d4cULL, + 0x4cc5d4becb3e42b6ULL, 0x597f299cfc657e2aULL, + 0x5fcb6fab3ad6faecULL, 0x6c44198c4a475817ULL +}; + +/* Initial hash value H for SHA-384 */ +const static u_int64_t sha384_initial_hash_value[8] = { + 0xcbbb9d5dc1059ed8ULL, + 0x629a292a367cd507ULL, + 0x9159015a3070dd17ULL, + 0x152fecd8f70e5939ULL, + 0x67332667ffc00b31ULL, + 0x8eb44a8768581511ULL, + 0xdb0c2e0d64f98fa7ULL, + 0x47b5481dbefa4fa4ULL +}; + +/* Initial hash value H for SHA-512 */ +const static u_int64_t sha512_initial_hash_value[8] = { + 0x6a09e667f3bcc908ULL, + 0xbb67ae8584caa73bULL, + 0x3c6ef372fe94f82bULL, + 0xa54ff53a5f1d36f1ULL, + 0x510e527fade682d1ULL, + 0x9b05688c2b3e6c1fULL, + 0x1f83d9abfb41bd6bULL, + 0x5be0cd19137e2179ULL +}; + + +/*** SHA-256: *********************************************************/ +void +SHA256_Init(SHA256_CTX *context) +{ + if (context == NULL) + return; + memcpy(context->state, sha256_initial_hash_value, + sizeof(sha256_initial_hash_value)); + memset(context->buffer, 0, sizeof(context->buffer)); + context->bitcount = 0; +} + +#ifdef SHA2_UNROLL_TRANSFORM + +/* Unrolled SHA-256 round macros: */ + +#define ROUND256_0_TO_15(a,b,c,d,e,f,g,h) do { \ + BE_8_TO_32(W256[j], data); \ + data += 4; \ + T1 = (h) + Sigma1_256((e)) + Ch((e), (f), (g)) + K256[j] + W256[j]; \ + (d) += T1; \ + (h) = T1 + Sigma0_256((a)) + Maj((a), (b), (c)); \ + j++; \ +} while(0) + +#define ROUND256(a,b,c,d,e,f,g,h) do { \ + s0 = W256[(j+1)&0x0f]; \ + s0 = sigma0_256(s0); \ + s1 = W256[(j+14)&0x0f]; \ + s1 = sigma1_256(s1); \ + T1 = (h) + Sigma1_256((e)) + Ch((e), (f), (g)) + K256[j] + \ + (W256[j&0x0f] += s1 + W256[(j+9)&0x0f] + s0); \ + (d) += T1; \ + (h) = T1 + Sigma0_256((a)) + Maj((a), (b), (c)); \ + j++; \ +} while(0) + +void +SHA256_Transform(u_int32_t state[8], const u_int8_t data[SHA256_BLOCK_LENGTH]) +{ + u_int32_t a, b, c, d, e, f, g, h, s0, s1; + u_int32_t T1, W256[16]; + int j; + + /* Initialize registers with the prev. intermediate value */ + a = state[0]; + b = state[1]; + c = state[2]; + d = state[3]; + e = state[4]; + f = state[5]; + g = state[6]; + h = state[7]; + + j = 0; + do { + /* Rounds 0 to 15 (unrolled): */ + ROUND256_0_TO_15(a,b,c,d,e,f,g,h); + ROUND256_0_TO_15(h,a,b,c,d,e,f,g); + ROUND256_0_TO_15(g,h,a,b,c,d,e,f); + ROUND256_0_TO_15(f,g,h,a,b,c,d,e); + ROUND256_0_TO_15(e,f,g,h,a,b,c,d); + ROUND256_0_TO_15(d,e,f,g,h,a,b,c); + ROUND256_0_TO_15(c,d,e,f,g,h,a,b); + ROUND256_0_TO_15(b,c,d,e,f,g,h,a); + } while (j < 16); + + /* Now for the remaining rounds up to 63: */ + do { + ROUND256(a,b,c,d,e,f,g,h); + ROUND256(h,a,b,c,d,e,f,g); + ROUND256(g,h,a,b,c,d,e,f); + ROUND256(f,g,h,a,b,c,d,e); + ROUND256(e,f,g,h,a,b,c,d); + ROUND256(d,e,f,g,h,a,b,c); + ROUND256(c,d,e,f,g,h,a,b); + ROUND256(b,c,d,e,f,g,h,a); + } while (j < 64); + + /* Compute the current intermediate hash value */ + state[0] += a; + state[1] += b; + state[2] += c; + state[3] += d; + state[4] += e; + state[5] += f; + state[6] += g; + state[7] += h; + + /* Clean up */ + a = b = c = d = e = f = g = h = T1 = 0; +} + +#else /* SHA2_UNROLL_TRANSFORM */ + +void +SHA256_Transform(u_int32_t state[8], const u_int8_t data[SHA256_BLOCK_LENGTH]) +{ + u_int32_t a, b, c, d, e, f, g, h, s0, s1; + u_int32_t T1, T2, W256[16]; + int j; + + /* Initialize registers with the prev. intermediate value */ + a = state[0]; + b = state[1]; + c = state[2]; + d = state[3]; + e = state[4]; + f = state[5]; + g = state[6]; + h = state[7]; + + j = 0; + do { + BE_8_TO_32(W256[j], data); + data += 4; + /* Apply the SHA-256 compression function to update a..h */ + T1 = h + Sigma1_256(e) + Ch(e, f, g) + K256[j] + W256[j]; + T2 = Sigma0_256(a) + Maj(a, b, c); + h = g; + g = f; + f = e; + e = d + T1; + d = c; + c = b; + b = a; + a = T1 + T2; + + j++; + } while (j < 16); + + do { + /* Part of the message block expansion: */ + s0 = W256[(j+1)&0x0f]; + s0 = sigma0_256(s0); + s1 = W256[(j+14)&0x0f]; + s1 = sigma1_256(s1); + + /* Apply the SHA-256 compression function to update a..h */ + T1 = h + Sigma1_256(e) + Ch(e, f, g) + K256[j] + + (W256[j&0x0f] += s1 + W256[(j+9)&0x0f] + s0); + T2 = Sigma0_256(a) + Maj(a, b, c); + h = g; + g = f; + f = e; + e = d + T1; + d = c; + c = b; + b = a; + a = T1 + T2; + + j++; + } while (j < 64); + + /* Compute the current intermediate hash value */ + state[0] += a; + state[1] += b; + state[2] += c; + state[3] += d; + state[4] += e; + state[5] += f; + state[6] += g; + state[7] += h; + + /* Clean up */ + a = b = c = d = e = f = g = h = T1 = T2 = 0; +} + +#endif /* SHA2_UNROLL_TRANSFORM */ + +void +SHA256_Update(SHA256_CTX *context, const u_int8_t *data, size_t len) +{ + size_t freespace, usedspace; + + /* Calling with no data is valid (we do nothing) */ + if (len == 0) + return; + + usedspace = (context->bitcount >> 3) % SHA256_BLOCK_LENGTH; + if (usedspace > 0) { + /* Calculate how much free space is available in the buffer */ + freespace = SHA256_BLOCK_LENGTH - usedspace; + + if (len >= freespace) { + /* Fill the buffer completely and process it */ + memcpy(&context->buffer[usedspace], data, freespace); + context->bitcount += freespace << 3; + len -= freespace; + data += freespace; + SHA256_Transform(context->state, context->buffer); + } else { + /* The buffer is not yet full */ + memcpy(&context->buffer[usedspace], data, len); + context->bitcount += len << 3; + /* Clean up: */ + usedspace = freespace = 0; + return; + } + } + while (len >= SHA256_BLOCK_LENGTH) { + /* Process as many complete blocks as we can */ + SHA256_Transform(context->state, data); + context->bitcount += SHA256_BLOCK_LENGTH << 3; + len -= SHA256_BLOCK_LENGTH; + data += SHA256_BLOCK_LENGTH; + } + if (len > 0) { + /* There's left-overs, so save 'em */ + memcpy(context->buffer, data, len); + context->bitcount += len << 3; + } + /* Clean up: */ + usedspace = freespace = 0; +} + +void +SHA256_Pad(SHA256_CTX *context) +{ + unsigned int usedspace; + + usedspace = (context->bitcount >> 3) % SHA256_BLOCK_LENGTH; + if (usedspace > 0) { + /* Begin padding with a 1 bit: */ + context->buffer[usedspace++] = 0x80; + + if (usedspace <= SHA256_SHORT_BLOCK_LENGTH) { + /* Set-up for the last transform: */ + memset(&context->buffer[usedspace], 0, + SHA256_SHORT_BLOCK_LENGTH - usedspace); + } else { + if (usedspace < SHA256_BLOCK_LENGTH) { + memset(&context->buffer[usedspace], 0, + SHA256_BLOCK_LENGTH - usedspace); + } + /* Do second-to-last transform: */ + SHA256_Transform(context->state, context->buffer); + + /* Prepare for last transform: */ + memset(context->buffer, 0, SHA256_SHORT_BLOCK_LENGTH); + } + } else { + /* Set-up for the last transform: */ + memset(context->buffer, 0, SHA256_SHORT_BLOCK_LENGTH); + + /* Begin padding with a 1 bit: */ + *context->buffer = 0x80; + } + /* Store the length of input data (in bits) in big endian format: */ + BE_64_TO_8(&context->buffer[SHA256_SHORT_BLOCK_LENGTH], + context->bitcount); + + /* Final transform: */ + SHA256_Transform(context->state, context->buffer); + + /* Clean up: */ + usedspace = 0; +} + +void +SHA256_Final(u_int8_t digest[SHA256_DIGEST_LENGTH], SHA256_CTX *context) +{ + SHA256_Pad(context); + + /* If no digest buffer is passed, we don't bother doing this: */ + if (digest != NULL) { +#if BYTE_ORDER == LITTLE_ENDIAN + int i; + + /* Convert TO host byte order */ + for (i = 0; i < 8; i++) + BE_32_TO_8(digest + i * 4, context->state[i]); +#else + memcpy(digest, context->state, SHA256_DIGEST_LENGTH); +#endif + memset(context, 0, sizeof(*context)); + } +} + + +/*** SHA-512: *********************************************************/ +void +SHA512_Init(SHA512_CTX *context) +{ + if (context == NULL) + return; + memcpy(context->state, sha512_initial_hash_value, + sizeof(sha512_initial_hash_value)); + memset(context->buffer, 0, sizeof(context->buffer)); + context->bitcount[0] = context->bitcount[1] = 0; +} + +#ifdef SHA2_UNROLL_TRANSFORM + +/* Unrolled SHA-512 round macros: */ + +#define ROUND512_0_TO_15(a,b,c,d,e,f,g,h) do { \ + BE_8_TO_64(W512[j], data); \ + data += 8; \ + T1 = (h) + Sigma1_512((e)) + Ch((e), (f), (g)) + K512[j] + W512[j]; \ + (d) += T1; \ + (h) = T1 + Sigma0_512((a)) + Maj((a), (b), (c)); \ + j++; \ +} while(0) + + +#define ROUND512(a,b,c,d,e,f,g,h) do { \ + s0 = W512[(j+1)&0x0f]; \ + s0 = sigma0_512(s0); \ + s1 = W512[(j+14)&0x0f]; \ + s1 = sigma1_512(s1); \ + T1 = (h) + Sigma1_512((e)) + Ch((e), (f), (g)) + K512[j] + \ + (W512[j&0x0f] += s1 + W512[(j+9)&0x0f] + s0); \ + (d) += T1; \ + (h) = T1 + Sigma0_512((a)) + Maj((a), (b), (c)); \ + j++; \ +} while(0) + +void +SHA512_Transform(u_int64_t state[8], const u_int8_t data[SHA512_BLOCK_LENGTH]) +{ + u_int64_t a, b, c, d, e, f, g, h, s0, s1; + u_int64_t T1, W512[16]; + int j; + + /* Initialize registers with the prev. intermediate value */ + a = state[0]; + b = state[1]; + c = state[2]; + d = state[3]; + e = state[4]; + f = state[5]; + g = state[6]; + h = state[7]; + + j = 0; + do { + /* Rounds 0 to 15 (unrolled): */ + ROUND512_0_TO_15(a,b,c,d,e,f,g,h); + ROUND512_0_TO_15(h,a,b,c,d,e,f,g); + ROUND512_0_TO_15(g,h,a,b,c,d,e,f); + ROUND512_0_TO_15(f,g,h,a,b,c,d,e); + ROUND512_0_TO_15(e,f,g,h,a,b,c,d); + ROUND512_0_TO_15(d,e,f,g,h,a,b,c); + ROUND512_0_TO_15(c,d,e,f,g,h,a,b); + ROUND512_0_TO_15(b,c,d,e,f,g,h,a); + } while (j < 16); + + /* Now for the remaining rounds up to 79: */ + do { + ROUND512(a,b,c,d,e,f,g,h); + ROUND512(h,a,b,c,d,e,f,g); + ROUND512(g,h,a,b,c,d,e,f); + ROUND512(f,g,h,a,b,c,d,e); + ROUND512(e,f,g,h,a,b,c,d); + ROUND512(d,e,f,g,h,a,b,c); + ROUND512(c,d,e,f,g,h,a,b); + ROUND512(b,c,d,e,f,g,h,a); + } while (j < 80); + + /* Compute the current intermediate hash value */ + state[0] += a; + state[1] += b; + state[2] += c; + state[3] += d; + state[4] += e; + state[5] += f; + state[6] += g; + state[7] += h; + + /* Clean up */ + a = b = c = d = e = f = g = h = T1 = 0; +} + +#else /* SHA2_UNROLL_TRANSFORM */ + +void +SHA512_Transform(u_int64_t state[8], const u_int8_t data[SHA512_BLOCK_LENGTH]) +{ + u_int64_t a, b, c, d, e, f, g, h, s0, s1; + u_int64_t T1, T2, W512[16]; + int j; + + /* Initialize registers with the prev. intermediate value */ + a = state[0]; + b = state[1]; + c = state[2]; + d = state[3]; + e = state[4]; + f = state[5]; + g = state[6]; + h = state[7]; + + j = 0; + do { + BE_8_TO_64(W512[j], data); + data += 8; + /* Apply the SHA-512 compression function to update a..h */ + T1 = h + Sigma1_512(e) + Ch(e, f, g) + K512[j] + W512[j]; + T2 = Sigma0_512(a) + Maj(a, b, c); + h = g; + g = f; + f = e; + e = d + T1; + d = c; + c = b; + b = a; + a = T1 + T2; + + j++; + } while (j < 16); + + do { + /* Part of the message block expansion: */ + s0 = W512[(j+1)&0x0f]; + s0 = sigma0_512(s0); + s1 = W512[(j+14)&0x0f]; + s1 = sigma1_512(s1); + + /* Apply the SHA-512 compression function to update a..h */ + T1 = h + Sigma1_512(e) + Ch(e, f, g) + K512[j] + + (W512[j&0x0f] += s1 + W512[(j+9)&0x0f] + s0); + T2 = Sigma0_512(a) + Maj(a, b, c); + h = g; + g = f; + f = e; + e = d + T1; + d = c; + c = b; + b = a; + a = T1 + T2; + + j++; + } while (j < 80); + + /* Compute the current intermediate hash value */ + state[0] += a; + state[1] += b; + state[2] += c; + state[3] += d; + state[4] += e; + state[5] += f; + state[6] += g; + state[7] += h; + + /* Clean up */ + a = b = c = d = e = f = g = h = T1 = T2 = 0; +} + +#endif /* SHA2_UNROLL_TRANSFORM */ + +void +SHA512_Update(SHA512_CTX *context, const u_int8_t *data, size_t len) +{ + size_t freespace, usedspace; + + /* Calling with no data is valid (we do nothing) */ + if (len == 0) + return; + + usedspace = (context->bitcount[0] >> 3) % SHA512_BLOCK_LENGTH; + if (usedspace > 0) { + /* Calculate how much free space is available in the buffer */ + freespace = SHA512_BLOCK_LENGTH - usedspace; + + if (len >= freespace) { + /* Fill the buffer completely and process it */ + memcpy(&context->buffer[usedspace], data, freespace); + ADDINC128(context->bitcount, freespace << 3); + len -= freespace; + data += freespace; + SHA512_Transform(context->state, context->buffer); + } else { + /* The buffer is not yet full */ + memcpy(&context->buffer[usedspace], data, len); + ADDINC128(context->bitcount, len << 3); + /* Clean up: */ + usedspace = freespace = 0; + return; + } + } + while (len >= SHA512_BLOCK_LENGTH) { + /* Process as many complete blocks as we can */ + SHA512_Transform(context->state, data); + ADDINC128(context->bitcount, SHA512_BLOCK_LENGTH << 3); + len -= SHA512_BLOCK_LENGTH; + data += SHA512_BLOCK_LENGTH; + } + if (len > 0) { + /* There's left-overs, so save 'em */ + memcpy(context->buffer, data, len); + ADDINC128(context->bitcount, len << 3); + } + /* Clean up: */ + usedspace = freespace = 0; +} + +void +SHA512_Pad(SHA512_CTX *context) +{ + unsigned int usedspace; + + usedspace = (context->bitcount[0] >> 3) % SHA512_BLOCK_LENGTH; + if (usedspace > 0) { + /* Begin padding with a 1 bit: */ + context->buffer[usedspace++] = 0x80; + + if (usedspace <= SHA512_SHORT_BLOCK_LENGTH) { + /* Set-up for the last transform: */ + memset(&context->buffer[usedspace], 0, SHA512_SHORT_BLOCK_LENGTH - usedspace); + } else { + if (usedspace < SHA512_BLOCK_LENGTH) { + memset(&context->buffer[usedspace], 0, SHA512_BLOCK_LENGTH - usedspace); + } + /* Do second-to-last transform: */ + SHA512_Transform(context->state, context->buffer); + + /* And set-up for the last transform: */ + memset(context->buffer, 0, SHA512_BLOCK_LENGTH - 2); + } + } else { + /* Prepare for final transform: */ + memset(context->buffer, 0, SHA512_SHORT_BLOCK_LENGTH); + + /* Begin padding with a 1 bit: */ + *context->buffer = 0x80; + } + /* Store the length of input data (in bits) in big endian format: */ + BE_64_TO_8(&context->buffer[SHA512_SHORT_BLOCK_LENGTH], + context->bitcount[1]); + BE_64_TO_8(&context->buffer[SHA512_SHORT_BLOCK_LENGTH + 8], + context->bitcount[0]); + + /* Final transform: */ + SHA512_Transform(context->state, context->buffer); + + /* Clean up: */ + usedspace = 0; +} + +void +SHA512_Final(u_int8_t digest[SHA512_DIGEST_LENGTH], SHA512_CTX *context) +{ + SHA512_Pad(context); + + /* If no digest buffer is passed, we don't bother doing this: */ + if (digest != NULL) { +#if BYTE_ORDER == LITTLE_ENDIAN + int i; + + /* Convert TO host byte order */ + for (i = 0; i < 8; i++) + BE_64_TO_8(digest + i * 8, context->state[i]); +#else + memcpy(digest, context->state, SHA512_DIGEST_LENGTH); +#endif + memset(context, 0, sizeof(*context)); + } +} + + +#if 0 +/*** SHA-384: *********************************************************/ +void +SHA384_Init(SHA384_CTX *context) +{ + if (context == NULL) + return; + memcpy(context->state, sha384_initial_hash_value, + sizeof(sha384_initial_hash_value)); + memset(context->buffer, 0, sizeof(context->buffer)); + context->bitcount[0] = context->bitcount[1] = 0; +} + +__weak_alias(SHA384_Transform, SHA512_Transform); +__weak_alias(SHA384_Update, SHA512_Update); +__weak_alias(SHA384_Pad, SHA512_Pad); + +void +SHA384_Final(u_int8_t digest[SHA384_DIGEST_LENGTH], SHA384_CTX *context) +{ + SHA384_Pad(context); + + /* If no digest buffer is passed, we don't bother doing this: */ + if (digest != NULL) { +#if BYTE_ORDER == LITTLE_ENDIAN + int i; + + /* Convert TO host byte order */ + for (i = 0; i < 6; i++) + BE_64_TO_8(digest + i * 8, context->state[i]); +#else + memcpy(digest, context->state, SHA384_DIGEST_LENGTH); +#endif + } + + /* Zero out state data */ + memset(context, 0, sizeof(*context)); +} +#endif + +#endif /* !defined(HAVE_EVP_SHA256) && !defined(HAVE_SHA256_UPDATE) && \ + (OPENSSL_VERSION_NUMBER >= 0x00907000L) */ diff --git a/crypto/openssh/openbsd-compat/sha2.h b/crypto/openssh/openbsd-compat/sha2.h new file mode 100755 index 000000000000..821f2dd6c510 --- /dev/null +++ b/crypto/openssh/openbsd-compat/sha2.h @@ -0,0 +1,133 @@ +/* $OpenBSD: sha2.h,v 1.6 2004/06/22 01:57:30 jfb Exp $ */ + +/* + * FILE: sha2.h + * AUTHOR: Aaron D. Gifford <me@aarongifford.com> + * + * Copyright (c) 2000-2001, Aaron D. Gifford + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the copyright holder nor the names of contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTOR(S) ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTOR(S) BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $From: sha2.h,v 1.1 2001/11/08 00:02:01 adg Exp adg $ + */ + +/* OPENBSD ORIGINAL: include/sha2.h */ + +#ifndef _SSHSHA2_H +#define _SSHSHA2_H + +#include "includes.h" + +#include <openssl/opensslv.h> + +#if !defined(HAVE_EVP_SHA256) && !defined(HAVE_SHA256_UPDATE) && \ + (OPENSSL_VERSION_NUMBER >= 0x00907000L) + +/*** SHA-256/384/512 Various Length Definitions ***********************/ +#define SHA256_BLOCK_LENGTH 64 +#define SHA256_DIGEST_LENGTH 32 +#define SHA256_DIGEST_STRING_LENGTH (SHA256_DIGEST_LENGTH * 2 + 1) +#define SHA384_BLOCK_LENGTH 128 +#define SHA384_DIGEST_LENGTH 48 +#define SHA384_DIGEST_STRING_LENGTH (SHA384_DIGEST_LENGTH * 2 + 1) +#define SHA512_BLOCK_LENGTH 128 +#define SHA512_DIGEST_LENGTH 64 +#define SHA512_DIGEST_STRING_LENGTH (SHA512_DIGEST_LENGTH * 2 + 1) + + +/*** SHA-256/384/512 Context Structures *******************************/ +typedef struct _SHA256_CTX { + u_int32_t state[8]; + u_int64_t bitcount; + u_int8_t buffer[SHA256_BLOCK_LENGTH]; +} SHA256_CTX; +typedef struct _SHA512_CTX { + u_int64_t state[8]; + u_int64_t bitcount[2]; + u_int8_t buffer[SHA512_BLOCK_LENGTH]; +} SHA512_CTX; + +#if 0 +typedef SHA512_CTX SHA384_CTX; +#endif + +void SHA256_Init(SHA256_CTX *); +void SHA256_Transform(u_int32_t state[8], const u_int8_t [SHA256_BLOCK_LENGTH]); +void SHA256_Update(SHA256_CTX *, const u_int8_t *, size_t) + __attribute__((__bounded__(__string__,2,3))); +void SHA256_Pad(SHA256_CTX *); +void SHA256_Final(u_int8_t [SHA256_DIGEST_LENGTH], SHA256_CTX *) + __attribute__((__bounded__(__minbytes__,1,SHA256_DIGEST_LENGTH))); +char *SHA256_End(SHA256_CTX *, char *) + __attribute__((__bounded__(__minbytes__,2,SHA256_DIGEST_STRING_LENGTH))); +char *SHA256_File(const char *, char *) + __attribute__((__bounded__(__minbytes__,2,SHA256_DIGEST_STRING_LENGTH))); +char *SHA256_FileChunk(const char *, char *, off_t, off_t) + __attribute__((__bounded__(__minbytes__,2,SHA256_DIGEST_STRING_LENGTH))); +char *SHA256_Data(const u_int8_t *, size_t, char *) + __attribute__((__bounded__(__string__,1,2))) + __attribute__((__bounded__(__minbytes__,3,SHA256_DIGEST_STRING_LENGTH))); + +#if 0 +void SHA384_Init(SHA384_CTX *); +void SHA384_Transform(u_int64_t state[8], const u_int8_t [SHA384_BLOCK_LENGTH]); +void SHA384_Update(SHA384_CTX *, const u_int8_t *, size_t) + __attribute__((__bounded__(__string__,2,3))); +void SHA384_Pad(SHA384_CTX *); +void SHA384_Final(u_int8_t [SHA384_DIGEST_LENGTH], SHA384_CTX *) + __attribute__((__bounded__(__minbytes__,1,SHA384_DIGEST_LENGTH))); +char *SHA384_End(SHA384_CTX *, char *) + __attribute__((__bounded__(__minbytes__,2,SHA384_DIGEST_STRING_LENGTH))); +char *SHA384_File(const char *, char *) + __attribute__((__bounded__(__minbytes__,2,SHA384_DIGEST_STRING_LENGTH))); +char *SHA384_FileChunk(const char *, char *, off_t, off_t) + __attribute__((__bounded__(__minbytes__,2,SHA384_DIGEST_STRING_LENGTH))); +char *SHA384_Data(const u_int8_t *, size_t, char *) + __attribute__((__bounded__(__string__,1,2))) + __attribute__((__bounded__(__minbytes__,3,SHA384_DIGEST_STRING_LENGTH))); +#endif /* 0 */ + +void SHA512_Init(SHA512_CTX *); +void SHA512_Transform(u_int64_t state[8], const u_int8_t [SHA512_BLOCK_LENGTH]); +void SHA512_Update(SHA512_CTX *, const u_int8_t *, size_t) + __attribute__((__bounded__(__string__,2,3))); +void SHA512_Pad(SHA512_CTX *); +void SHA512_Final(u_int8_t [SHA512_DIGEST_LENGTH], SHA512_CTX *) + __attribute__((__bounded__(__minbytes__,1,SHA512_DIGEST_LENGTH))); +char *SHA512_End(SHA512_CTX *, char *) + __attribute__((__bounded__(__minbytes__,2,SHA512_DIGEST_STRING_LENGTH))); +char *SHA512_File(const char *, char *) + __attribute__((__bounded__(__minbytes__,2,SHA512_DIGEST_STRING_LENGTH))); +char *SHA512_FileChunk(const char *, char *, off_t, off_t) + __attribute__((__bounded__(__minbytes__,2,SHA512_DIGEST_STRING_LENGTH))); +char *SHA512_Data(const u_int8_t *, size_t, char *) + __attribute__((__bounded__(__string__,1,2))) + __attribute__((__bounded__(__minbytes__,3,SHA512_DIGEST_STRING_LENGTH))); + +#endif /* !defined(HAVE_EVP_SHA256) && !defined(HAVE_SHA256_UPDATE) && \ + (OPENSSL_VERSION_NUMBER >= 0x00907000L) */ + +#endif /* _SSHSHA2_H */ diff --git a/crypto/openssh/openssh.xml.in b/crypto/openssh/openssh.xml.in new file mode 100644 index 000000000000..655ee5c9e82d --- /dev/null +++ b/crypto/openssh/openssh.xml.in @@ -0,0 +1,87 @@ +<?xml version='1.0'?> +<!DOCTYPE service_bundle SYSTEM '/usr/share/lib/xml/dtd/service_bundle.dtd.1'> +<!-- + Copyright (c) 2006 Chad Mynhier. + + Permission to use, copy, modify, and distribute this software for any + purpose with or without fee is hereby granted, provided that the above + copyright notice and this permission notice appear in all copies. + + THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. +--> + +<service_bundle type='manifest' name='OpenSSH server'> + + <service + name='site/openssh' + type='service' + version='1'> + + <create_default_instance enabled='false'/> + + <single_instance/> + + <dependency + name='filesystem-local' + grouping='require_all' + restart_on='none' + type='service'> + <service_fmri value='svc:/system/filesystem/local'/> + </dependency> + + <dependency + name='network' + grouping='require_all' + restart_on='none' + type='service'> + <service_fmri value='svc:/milestone/network'/> + </dependency> + + <dependent + name='multi-user-server' + restart_on='none' + grouping='optional_all'> + <service_fmri value='svc:/milestone/multi-user-server'/> + </dependent> + + <exec_method + name='start' + type='method' + exec='/lib/svc/method/site/opensshd start' + timeout_seconds='60'> + <method_context/> + </exec_method> + + <exec_method + name='stop' + type='method' + exec=':kill' + timeout_seconds='60'> + <method_context/> + </exec_method> + + <property_group + name='startd' + type='framework'> + <propval name='ignore_error' type='astring' value='core,signal'/> + </property_group> + + <template> + <common_name> + <loctext xml:lang='C'>OpenSSH server</loctext> + </common_name> + <documentation> + <manpage + title='sshd' + section='1M' + manpath='@prefix@/man'/> + </documentation> + </template> + </service> +</service_bundle> diff --git a/crypto/openssh/platform.c b/crypto/openssh/platform.c new file mode 100644 index 000000000000..aee4b01e7c6d --- /dev/null +++ b/crypto/openssh/platform.c @@ -0,0 +1,46 @@ +/* $Id: platform.c,v 1.1 2006/08/30 17:24:41 djm Exp $ */ + +/* + * Copyright (c) 2006 Darren Tucker. All rights reserved. + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include "config.h" +#include "platform.h" + +#include "openbsd-compat/openbsd-compat.h" + +void +platform_pre_fork(void) +{ +#ifdef USE_SOLARIS_PROCESS_CONTRACTS + solaris_contract_pre_fork(); +#endif +} + +void +platform_post_fork_parent(pid_t child_pid) +{ +#ifdef USE_SOLARIS_PROCESS_CONTRACTS + solaris_contract_post_fork_parent(child_pid); +#endif +} + +void +platform_post_fork_child(void) +{ +#ifdef USE_SOLARIS_PROCESS_CONTRACTS + solaris_contract_post_fork_child(); +#endif +} diff --git a/crypto/openssh/platform.h b/crypto/openssh/platform.h new file mode 100644 index 000000000000..cf93bc57c0ef --- /dev/null +++ b/crypto/openssh/platform.h @@ -0,0 +1,23 @@ +/* $Id: platform.h,v 1.1 2006/08/30 17:24:41 djm Exp $ */ + +/* + * Copyright (c) 2006 Darren Tucker. All rights reserved. + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include <sys/types.h> + +void platform_pre_fork(void); +void platform_post_fork_parent(pid_t child_pid); +void platform_post_fork_child(void); diff --git a/crypto/openssh/regress/cfgmatch.sh b/crypto/openssh/regress/cfgmatch.sh new file mode 100644 index 000000000000..d987dcb972ed --- /dev/null +++ b/crypto/openssh/regress/cfgmatch.sh @@ -0,0 +1,106 @@ +# $OpenBSD: cfgmatch.sh,v 1.2 2006/07/22 01:50:00 dtucker Exp $ +# Placed in the Public Domain. + +tid="sshd_config match" + +pidfile=$OBJ/remote_pid +fwdport=3301 +fwd="-L $fwdport:127.0.0.1:$PORT" + +stop_client() +{ + pid=`cat $pidfile` + if [ ! -z "$pid" ]; then + kill $pid + sleep 1 + fi +} + +cp $OBJ/sshd_proxy $OBJ/sshd_proxy_bak + +echo "PermitOpen 127.0.0.1:1" >>$OBJ/sshd_config +echo "Match Address 127.0.0.1" >>$OBJ/sshd_config +echo "PermitOpen 127.0.0.1:$PORT" >>$OBJ/sshd_config + +echo "PermitOpen 127.0.0.1:1" >>$OBJ/sshd_proxy +echo "Match Address 127.0.0.1" >>$OBJ/sshd_proxy +echo "PermitOpen 127.0.0.1:$PORT" >>$OBJ/sshd_proxy + +start_sshd + +#set -x + +# Test Match + PermitOpen in sshd_config. This should be permitted +for p in 1 2; do + rm -f $pidfile + trace "match permitopen localhost proto $p" + ${SSH} -$p $fwd -F $OBJ/ssh_config -f somehost \ + "echo \$\$ > $pidfile; exec sleep 100" >>$TEST_SSH_LOGFILE 2>&1 ||\ + fail "match permitopen proto $p sshd failed" + sleep 1; + ${SSH} -q -$p -p $fwdport -F $OBJ/ssh_config somehost true || \ + fail "match permitopen permit proto $p" + stop_client +done + +# Same but from different source. This should not be permitted +for p in 1 2; do + rm -f $pidfile + trace "match permitopen proxy proto $p" + ${SSH} -q -$p $fwd -F $OBJ/ssh_proxy -f somehost \ + "echo \$\$ > $pidfile; exec sleep 100" >>$TEST_SSH_LOGFILE 2>&1 ||\ + fail "match permitopen proxy proto $p sshd failed" + sleep 1; + ${SSH} -q -$p -p $fwdport -F $OBJ/ssh_config somehost true && \ + fail "match permitopen deny proto $p" + stop_client +done + +# Retry previous with key option, should also be denied. +echo -n 'permitopen="127.0.0.1:'$PORT'" ' >$OBJ/authorized_keys_$USER +cat $OBJ/rsa.pub >> $OBJ/authorized_keys_$USER +echo -n 'permitopen="127.0.0.1:'$PORT'" ' >>$OBJ/authorized_keys_$USER +cat $OBJ/rsa1.pub >> $OBJ/authorized_keys_$USER +for p in 1 2; do + rm -f $pidfile + trace "match permitopen proxy w/key opts proto $p" + ${SSH} -q -$p $fwd -F $OBJ/ssh_proxy -f somehost \ + "echo \$\$ > $pidfile; exec sleep 100" >>$TEST_SSH_LOGFILE 2>&1 ||\ + fail "match permitopen w/key opt proto $p sshd failed" + sleep 1; + ${SSH} -q -$p -p $fwdport -F $OBJ/ssh_config somehost true && \ + fail "match permitopen deny w/key opt proto $p" + stop_client +done + +# Test both sshd_config and key options permitting the same dst/port pair. +# Should be permitted. +for p in 1 2; do + rm -f $pidfile + trace "match permitopen localhost proto $p" + ${SSH} -$p $fwd -F $OBJ/ssh_config -f somehost \ + "echo \$\$ > $pidfile; exec sleep 100" >>$TEST_SSH_LOGFILE 2>&1 ||\ + fail "match permitopen proto $p sshd failed" + sleep 1; + ${SSH} -q -$p -p $fwdport -F $OBJ/ssh_config somehost true || \ + fail "match permitopen permit proto $p" + stop_client +done + +cp $OBJ/sshd_proxy_bak $OBJ/sshd_proxy +echo "PermitOpen 127.0.0.1:1 127.0.0.1:$PORT 127.0.0.2:2" >>$OBJ/sshd_proxy +echo "Match User $USER" >>$OBJ/sshd_proxy +echo "PermitOpen 127.0.0.1:1 127.0.0.1:2" >>$OBJ/sshd_proxy + +# Test that a Match overrides a PermitOpen in the global section +for p in 1 2; do + rm -f $pidfile + trace "match permitopen proxy w/key opts proto $p" + ${SSH} -q -$p $fwd -F $OBJ/ssh_proxy -f somehost \ + "echo \$\$ > $pidfile; exec sleep 100" >>$TEST_SSH_LOGFILE 2>&1 ||\ + fail "match override permitopen proto $p sshd failed" + sleep 1; + ${SSH} -q -$p -p $fwdport -F $OBJ/ssh_config somehost true && \ + fail "match override permitopen proto $p" + stop_client +done diff --git a/crypto/openssh/regress/cipher-speed.sh b/crypto/openssh/regress/cipher-speed.sh new file mode 100644 index 000000000000..5925111438ae --- /dev/null +++ b/crypto/openssh/regress/cipher-speed.sh @@ -0,0 +1,47 @@ +# $OpenBSD: cipher-speed.sh,v 1.2 2005/05/24 04:09:54 djm Exp $ +# Placed in the Public Domain. + +tid="cipher speed" + +getbytes () +{ + sed -n '/transferred/s/.*secs (\(.* bytes.sec\).*/\1/p' +} + +tries="1 2" +DATA=/bin/ls +DATA=/bsd + +macs="hmac-sha1 hmac-md5 hmac-sha1-96 hmac-md5-96" +ciphers="aes128-cbc 3des-cbc blowfish-cbc cast128-cbc + arcfour128 arcfour256 arcfour aes192-cbc aes256-cbc aes128-ctr" + +for c in $ciphers; do for m in $macs; do + trace "proto 2 cipher $c mac $m" + for x in $tries; do + echo -n "$c/$m:\t" + ( ${SSH} -o 'compression no' \ + -F $OBJ/ssh_proxy -2 -m $m -c $c somehost \ + exec sh -c \'"dd of=/dev/null obs=32k"\' \ + < ${DATA} ) 2>&1 | getbytes + + if [ $? -ne 0 ]; then + fail "ssh -2 failed with mac $m cipher $c" + fi + done +done; done + +ciphers="3des blowfish" +for c in $ciphers; do + trace "proto 1 cipher $c" + for x in $tries; do + echo -n "$c:\t" + ( ${SSH} -o 'compression no' \ + -F $OBJ/ssh_proxy -1 -c $c somehost \ + exec sh -c \'"dd of=/dev/null obs=32k"\' \ + < ${DATA} ) 2>&1 | getbytes + if [ $? -ne 0 ]; then + fail "ssh -1 failed with cipher $c" + fi + done +done diff --git a/crypto/openssh/regress/forcecommand.sh b/crypto/openssh/regress/forcecommand.sh new file mode 100644 index 000000000000..99e51a60ffd4 --- /dev/null +++ b/crypto/openssh/regress/forcecommand.sh @@ -0,0 +1,42 @@ +# $OpenBSD: forcecommand.sh,v 1.1 2006/07/19 13:09:28 dtucker Exp $ +# Placed in the Public Domain. + +tid="forced command" + +cp $OBJ/sshd_proxy $OBJ/sshd_proxy_bak + +echon 'command="true" ' >$OBJ/authorized_keys_$USER +cat $OBJ/rsa.pub >> $OBJ/authorized_keys_$USER +echon 'command="true" ' >>$OBJ/authorized_keys_$USER +cat $OBJ/rsa1.pub >> $OBJ/authorized_keys_$USER + +for p in 1 2; do + trace "forced command in key option proto $p" + ${SSH} -$p -F $OBJ/ssh_proxy somehost false \ || + fail "forced command in key proto $p" +done + +echon 'command="false" ' >$OBJ/authorized_keys_$USER +cat $OBJ/rsa.pub >> $OBJ/authorized_keys_$USER +echon 'command="false" ' >>$OBJ/authorized_keys_$USER +cat $OBJ/rsa1.pub >> $OBJ/authorized_keys_$USER + +cp $OBJ/sshd_proxy_bak $OBJ/sshd_proxy +echo "ForceCommand true" >> $OBJ/sshd_proxy + +for p in 1 2; do + trace "forced command in sshd_config overrides key option proto $p" + ${SSH} -$p -F $OBJ/ssh_proxy somehost false \ || + fail "forced command in key proto $p" +done + +cp $OBJ/sshd_proxy_bak $OBJ/sshd_proxy +echo "ForceCommand false" >> $OBJ/sshd_proxy +echo "Match User $USER" >> $OBJ/sshd_proxy +echo " ForceCommand true" >> $OBJ/sshd_proxy + +for p in 1 2; do + trace "forced command with match proto $p" + ${SSH} -$p -F $OBJ/ssh_proxy somehost false \ || + fail "forced command in key proto $p" +done diff --git a/lib/libutil/kld.3 b/lib/libutil/kld.3 new file mode 100644 index 000000000000..decaee789eef --- /dev/null +++ b/lib/libutil/kld.3 @@ -0,0 +1,93 @@ +.\"- +.\" Copyright (c) 2006 Dag-Erling Coïdan Smørgrav +.\" All rights reserved. +.\" +.\" Redistribution and use in source and binary forms, with or without +.\" modification, are permitted provided that the following conditions +.\" are met: +.\" 1. Redistributions of source code must retain the above copyright +.\" notice, this list of conditions and the following disclaimer. +.\" 2. Redistributions in binary form must reproduce the above copyright +.\" notice, this list of conditions and the following disclaimer in the +.\" documentation and/or other materials provided with the distribution. +.\" +.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND +.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE +.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS +.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY +.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +.\" SUCH DAMAGE. +.\" +.\" $FreeBSD$ +.\" +.Dd February 18, 2006 +.Os +.Dt KLD 3 +.Sh NAME +.Nm kld_isloaded , +.Nm kld_load +.Nd kld utility functions +.Sh LIBRARY +.Lb libutil +.Sh SYNOPSIS +.In libutil.h +.Ft int +.Fn kld_isloaded "const char *name" +.Ft int +.Fn kld_load "const char *name" +.Sh DESCRIPTION +These functions facilitate loading kernel modules from userland +applications. +.Pp +The +.Fn kld_isloaded +function takes a name and returns a non-zero value if a module of that +name is currently loaded. +The name can be either the name of a module file +.Pq Pa cpufreq.ko , +the same name without the +.Pa .ko +extension +.Pq Pa cpufreq , +or the name of a module contained within that file +.Pq Pa cpu/ichss . +Only the latter will return correct results if the module is compiled +into the kernel. +.Pp +The +.Fn kld_load +function is a simple wrapper around the +.Xr kldload 2 +function. +It returns zero if and only if the corresponding +.Fn kldload +call succeeded or returned +.Er EEXIST +(signifying that the requested module was already loaded). +.Sh SEE ALSO +.Xr kldfirstmod 2 , +.Xr kldload 2 , +.Xr kldnext 2 , +.Xr kldstat 2 , +.Xr modfnext 2 , +.Xr modstat 2 , +.Xr kld 4 +.Sh HISTORY +The +.Fn kld_isloaded +and +.Fn kld_load +functions first appeared in +.Fx 7.0 . +.Sh AUTHORS +The +.Fn kld_isloaded +and +.Fn kld_load +functions and this manual page were written by +.An Dag-Erling Sm\(/orgrav Aq des@FreeBSD.org . diff --git a/share/man/man4/snd_envy24.4 b/share/man/man4/snd_envy24.4 new file mode 100644 index 000000000000..a14ae158e2d2 --- /dev/null +++ b/share/man/man4/snd_envy24.4 @@ -0,0 +1,82 @@ +.\" Copyright (c) 2006 Alexander Leidinger +.\" All rights reserved. +.\" +.\" Redistribution and use in source and binary forms, with or without +.\" modification, are permitted provided that the following conditions +.\" are met: +.\" 1. Redistributions of source code must retain the above copyright +.\" notice, this list of conditions and the following disclaimer. +.\" 2. Redistributions in binary form must reproduce the above copyright +.\" notice, this list of conditions and the following disclaimer in the +.\" documentation and/or other materials provided with the distribution. +.\" +.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND +.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE +.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS +.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY +.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +.\" SUCH DAMAGE. +.\" +.\" $FreeBSD$ +.\" +.Dd September 30, 2006 +.Dt SND_ENVY24 4 +.Os +.Sh NAME +.Nm snd_envy24 +.Nd "VIA Envy24 and compatible bridge device driver" +.Sh SYNOPSIS +To compile this driver into the kernel, place the following lines in your +kernel configuration file: +.Bd -ragged -offset indent +.Cd "device sound" +.Cd "device snd_envy24" +.Cd "device snd_spicds" +.Ed +.Pp +Alternatively, to load the driver as a module at boot time, place the +following line in +.Xr loader.conf 5 : +.Bd -literal -offset indent +snd_envy24_load="YES" +.Ed +.Sh DESCRIPTION +The +.Nm +bridge driver allows the generic audio driver +.Xr sound 4 +to attach to VIA Envy24 (ICE1724 or VT1724 chipset) and compatible audio +devices. +.Sh HARDWARE +The +.Nm +driver supports the following audio devices: +.Pp +.Bl -bullet -compact +.It +M-Audio Audiophile 2496 +.It +M-Audio Delta Dio 2496 +.It +Terratec DMX 6fire +.El +.Sh SEE ALSO +.Xr sound 4 +.Sh HISTORY +The +.Nm +device driver first appeared in +.Fx 7.0 . +.Sh AUTHORS +.An -nosplit +The +.Nm +driver was written by +.An Katsurajima Naoto . +This manual page was written by +.An Alexander Leidinger Aq netchild@FreeBSD.org . diff --git a/share/man/man4/snd_envy24ht.4 b/share/man/man4/snd_envy24ht.4 new file mode 100644 index 000000000000..9d59536b7ded --- /dev/null +++ b/share/man/man4/snd_envy24ht.4 @@ -0,0 +1,99 @@ +.\" Copyright (c) 2006 Alexander Leidinger +.\" All rights reserved. +.\" +.\" Redistribution and use in source and binary forms, with or without +.\" modification, are permitted provided that the following conditions +.\" are met: +.\" 1. Redistributions of source code must retain the above copyright +.\" notice, this list of conditions and the following disclaimer. +.\" 2. Redistributions in binary form must reproduce the above copyright +.\" notice, this list of conditions and the following disclaimer in the +.\" documentation and/or other materials provided with the distribution. +.\" +.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND +.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE +.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS +.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY +.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +.\" SUCH DAMAGE. +.\" +.\" $FreeBSD$ +.\" +.Dd September 30, 2006 +.Dt SND_ENVY24HT 4 +.Os +.Sh NAME +.Nm snd_envy24ht +.Nd "VIA Envy24HT and compatible bridge device driver" +.Sh SYNOPSIS +To compile this driver into the kernel, place the following lines in your +kernel configuration file: +.Bd -ragged -offset indent +.Cd "device sound" +.Cd "device snd_envy24ht" +.Cd "device snd_spicds" +.Ed +.Pp +Alternatively, to load the driver as a module at boot time, place the +following line in +.Xr loader.conf 5 : +.Bd -literal -offset indent +snd_envy24ht_load="YES" +.Ed +.Sh DESCRIPTION +The +.Nm +bridge driver allows the generic audio driver +.Xr sound 4 +to attach to VIA Envy24HT (ICE1724 or VT1724 chipset) and compatible audio +devices. +.Sh HARDWARE +The +.Nm +driver supports the following audio devices: +.Pp +.Bl -bullet -compact +.It +Audiotrak Prodigy 7.1 +.It +Audiotrak Prodigy 7.1 LT +.It +M-Audio Audiophile 192 +.It +M-Audio Revolution 5.1 +.It +M-Audio Revolution 7.1 +.It +Terratec Aureon 5.1 Sky +.It +Terratec Aureon 7.1 Space +.It +Terratec Aureon 7.1 Universe +.It +Terratec PHASE 22 +.It +Terratec PHASE 28 +.El +.Sh SEE ALSO +.Xr sound 4 +.Sh HISTORY +The +.Nm +device driver first appeared in +.Fx 7.0 . +.Sh AUTHORS +.An -nosplit +The +.Nm +driver was written by +.An Konstantin Dimitrov +based upon the +.Xr snd_envy24 4 +driver. +This manual page was written by +.An Alexander Leidinger Aq netchild@FreeBSD.org . diff --git a/sys/dev/sound/pci/hda/hdac.h b/sys/dev/sound/pci/hda/hdac.h new file mode 100644 index 000000000000..298afde5728d --- /dev/null +++ b/sys/dev/sound/pci/hda/hdac.h @@ -0,0 +1,69 @@ +/*- + * Copyright (c) 2006 Stephane E. Potvin <sepotvin@videotron.ca> + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $FreeBSD$ + */ + +#ifndef _HDAC_H_ +#define _HDAC_H_ + + +#if 0 +/**************************************************************************** + * Miscellanious defines + ****************************************************************************/ + +/**************************************************************************** + * Helper Macros + ****************************************************************************/ + +/**************************************************************************** + * Simplified Accessors for HDA devices + ****************************************************************************/ +enum hdac_device_ivars { + HDAC_IVAR_CODEC_ID, + HDAC_IVAR_NODE_ID, + HDAC_IVAR_VENDOR_ID, + HDAC_IVAR_DEVICE_ID, + HDAC_IVAR_REVISION_ID, + HDAC_IVAR_STEPPING_ID, + HDAC_IVAR_NODE_TYPE, +}; + +#define HDAC_ACCESSOR(var, ivar, type) \ + __BUS_ACCESSOR(hdac, var, HDAC, ivar, type) + +HDAC_ACCESSOR(codec_id, CODEC_ID, uint8_t); +HDAC_ACCESSOR(node_id, NODE_ID, uint8_t); +HDAC_ACCESSOR(vendor_id, VENDOR_ID, uint16_t); +HDAC_ACCESSOR(device_id, DEVICE_ID, uint16_t); +HDAC_ACCESSOR(revision_id, REVISION_ID, uint8_t); +HDAC_ACCESSOR(stepping_id, STEPPING_ID, uint8_t); +HDAC_ACCESSOR(node_type, NODE_TYPE, uint8_t); +#endif + +#define PCIS_MULTIMEDIA_HDA 0x03 + +#endif diff --git a/sys/dev/sound/pci/hda/hdac_reg.h b/sys/dev/sound/pci/hda/hdac_reg.h new file mode 100644 index 000000000000..969471023d34 --- /dev/null +++ b/sys/dev/sound/pci/hda/hdac_reg.h @@ -0,0 +1,266 @@ +/*- + * Copyright (c) 2006 Stephane E. Potvin <sepotvin@videotron.ca> + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $FreeBSD$ + */ + +#ifndef _HDAC_REG_H_ +#define _HDAC_REG_H_ + +/**************************************************************************** + * HDA Controller Register Set + ****************************************************************************/ +#define HDAC_GCAP 0x00 /* 2 - Global Capabilities*/ +#define HDAC_VMIN 0x02 /* 1 - Minor Version */ +#define HDAC_VMAJ 0x03 /* 1 - Major Version */ +#define HDAC_OUTPAY 0x04 /* 2 - Output Payload Capability */ +#define HDAC_INPAY 0x06 /* 2 - Input Payload Capability */ +#define HDAC_GCTL 0x08 /* 4 - Global Control */ +#define HDAC_WAKEEN 0x0c /* 2 - Wake Enable */ +#define HDAC_STATESTS 0x0e /* 2 - State Change Status */ +#define HDAC_GSTS 0x10 /* 2 - Global Status */ +#define HDAC_OUTSTRMPAY 0x18 /* 2 - Output Stream Payload Capability */ +#define HDAC_INSTRMPAY 0x1a /* 2 - Input Stream Payload Capability */ +#define HDAC_INTCTL 0x20 /* 4 - Interrupt Control */ +#define HDAC_INTSTS 0x24 /* 4 - Interrupt Status */ +#define HDAC_WALCLK 0x30 /* 4 - Wall Clock Counter */ +#define HDAC_SSYNC 0x38 /* 4 - Stream Synchronization */ +#define HDAC_CORBLBASE 0x40 /* 4 - CORB Lower Base Address */ +#define HDAC_CORBUBASE 0x44 /* 4 - CORB Upper Base Address */ +#define HDAC_CORBWP 0x48 /* 2 - CORB Write Pointer */ +#define HDAC_CORBRP 0x4a /* 2 - CORB Read Pointer */ +#define HDAC_CORBCTL 0x4c /* 1 - CORB Control */ +#define HDAC_CORBSTS 0x4d /* 1 - CORB Status */ +#define HDAC_CORBSIZE 0x4e /* 1 - CORB Size */ +#define HDAC_RIRBLBASE 0x50 /* 4 - RIRB Lower Base Address */ +#define HDAC_RIRBUBASE 0x54 /* 4 - RIRB Upper Base Address */ +#define HDAC_RIRBWP 0x58 /* 2 - RIRB Write Pointer */ +#define HDAC_RINTCNT 0x5a /* 2 - Response Interrupt Count */ +#define HDAC_RIRBCTL 0x5c /* 1 - RIRB Control */ +#define HDAC_RIRBSTS 0x5d /* 1 - RIRB Status */ +#define HDAC_RIRBSIZE 0x5e /* 1 - RIRB Size */ +#define HDAC_ICOI 0x60 /* 4 - Immediate Command Output Interface */ +#define HDAC_ICII 0x64 /* 4 - Immediate Command Input Interface */ +#define HDAC_ICIS 0x68 /* 2 - Immediate Command Status */ +#define HDAC_DPIBLBASE 0x70 /* 4 - DMA Position Buffer Lower Base */ +#define HDAC_DPIBUBASE 0x74 /* 4 - DMA Position Buffer Upper Base */ +#define HDAC_SDCTL0 0x80 /* 3 - Stream Descriptor Control */ +#define HDAC_SDCTL1 0x81 /* 3 - Stream Descriptor Control */ +#define HDAC_SDCTL2 0x82 /* 3 - Stream Descriptor Control */ +#define HDAC_SDSTS 0x83 /* 1 - Stream Descriptor Status */ +#define HDAC_SDLPIB 0x84 /* 4 - Link Position in Buffer */ +#define HDAC_SDCBL 0x88 /* 4 - Cyclic Buffer Length */ +#define HDAC_SDLVI 0x8C /* 2 - Last Valid Index */ +#define HDAC_SDFIFOS 0x90 /* 2 - FIFOS */ +#define HDAC_SDFMT 0x92 /* 2 - fmt */ +#define HDAC_SDBDPL 0x98 /* 4 - Buffer Descriptor Pointer Lower Base */ +#define HDAC_SDBDPU 0x9C /* 4 - Buffer Descriptor Pointer Upper Base */ + +#define _HDAC_ISDOFFSET(n, iss, oss) (0x80 + ((n) * 0x20)) +#define _HDAC_ISDCTL(n, iss, oss) (0x00 + _HDAC_ISDOFFSET(n, iss, oss)) +#define _HDAC_ISDSTS(n, iss, oss) (0x03 + _HDAC_ISDOFFSET(n, iss, oss)) +#define _HDAC_ISDPICB(n, iss, oss) (0x04 + _HDAC_ISDOFFSET(n, iss, oss)) +#define _HDAC_ISDCBL(n, iss, oss) (0x08 + _HDAC_ISDOFFSET(n, iss, oss)) +#define _HDAC_ISDLVI(n, iss, oss) (0x0c + _HDAC_ISDOFFSET(n, iss, oss)) +#define _HDAC_ISDFIFOD(n, iss, oss) (0x10 + _HDAC_ISDOFFSET(n, iss, oss)) +#define _HDAC_ISDFMT(n, iss, oss) (0x12 + _HDAC_ISDOFFSET(n, iss, oss)) +#define _HDAC_ISDBDPL(n, iss, oss) (0x18 + _HDAC_ISDOFFSET(n, iss, oss)) +#define _HDAC_ISDBDPU(n, iss, oss) (0x1c + _HDAC_ISDOFFSET(n, iss, oss)) + +#define _HDAC_OSDOFFSET(n, iss, oss) (0x80 + ((iss) * 0x20) + ((n) * 0x20)) +#define _HDAC_OSDCTL(n, iss, oss) (0x00 + _HDAC_OSDOFFSET(n, iss, oss)) +#define _HDAC_OSDSTS(n, iss, oss) (0x03 + _HDAC_OSDOFFSET(n, iss, oss)) +#define _HDAC_OSDPICB(n, iss, oss) (0x04 + _HDAC_OSDOFFSET(n, iss, oss)) +#define _HDAC_OSDCBL(n, iss, oss) (0x08 + _HDAC_OSDOFFSET(n, iss, oss)) +#define _HDAC_OSDLVI(n, iss, oss) (0x0c + _HDAC_OSDOFFSET(n, iss, oss)) +#define _HDAC_OSDFIFOD(n, iss, oss) (0x10 + _HDAC_OSDOFFSET(n, iss, oss)) +#define _HDAC_OSDFMT(n, iss, oss) (0x12 + _HDAC_OSDOFFSET(n, iss, oss)) +#define _HDAC_OSDBDPL(n, iss, oss) (0x18 + _HDAC_OSDOFFSET(n, iss, oss)) +#define _HDAC_OSDBDPU(n, iss, oss) (0x1c + _HDAC_OSDOFFSET(n, iss, oss)) + +#define _HDAC_BSDOFFSET(n, iss, oss) (0x80 + ((iss) * 0x20) + ((oss) * 0x20) + ((n) * 0x20)) +#define _HDAC_BSDCTL(n, iss, oss) (0x00 + _HDAC_BSDOFFSET(n, iss, oss)) +#define _HDAC_BSDSTS(n, iss, oss) (0x03 + _HDAC_BSDOFFSET(n, iss, oss)) +#define _HDAC_BSDPICB(n, iss, oss) (0x04 + _HDAC_BSDOFFSET(n, iss, oss)) +#define _HDAC_BSDCBL(n, iss, oss) (0x08 + _HDAC_BSDOFFSET(n, iss, oss)) +#define _HDAC_BSDLVI(n, iss, oss) (0x0c + _HDAC_BSDOFFSET(n, iss, oss)) +#define _HDAC_BSDFIFOD(n, iss, oss) (0x10 + _HDAC_BSDOFFSET(n, iss, oss)) +#define _HDAC_BSDFMT(n, iss, oss) (0x12 + _HDAC_BSDOFFSET(n, iss, oss)) +#define _HDAC_BSDBDPL(n, iss, oss) (0x18 + _HDAC_BSDOFFSET(n, iss, oss)) +#define _HDAC_BSDBDBU(n, iss, oss) (0x1c + _HDAC_BSDOFFSET(n, iss, oss)) + +/**************************************************************************** + * HDA Controller Register Fields + ****************************************************************************/ + +/* GCAP - Global Capabilities */ +#define HDAC_GCAP_64OK 0x0001 +#define HDAC_GCAP_NSDO_MASK 0x0006 +#define HDAC_GCAP_NSDO_SHIFT 1 +#define HDAC_GCAP_BSS_MASK 0x00f8 +#define HDAC_GCAP_BSS_SHIFT 3 +#define HDAC_GCAP_ISS_MASK 0x0f00 +#define HDAC_GCAP_ISS_SHIFT 8 +#define HDAC_GCAP_OSS_MASK 0xf000 +#define HDAC_GCAP_OSS_SHIFT 12 + +#define HDAC_GCAP_NSDO_1SDO 0x00 +#define HDAC_GCAP_NSDO_2SDO 0x02 +#define HDAC_GCAP_NSDO_4SDO 0x04 + +#define HDAC_GCAP_BSS(gcap) \ + (((gcap) & HDAC_GCAP_BSS_MASK) >> HDAC_GCAP_BSS_SHIFT) +#define HDAC_GCAP_ISS(gcap) \ + (((gcap) & HDAC_GCAP_ISS_MASK) >> HDAC_GCAP_ISS_SHIFT) +#define HDAC_GCAP_OSS(gcap) \ + (((gcap) & HDAC_GCAP_OSS_MASK) >> HDAC_GCAP_OSS_SHIFT) + +/* GCTL - Global Control */ +#define HDAC_GCTL_CRST 0x00000001 +#define HDAC_GCTL_FCNTRL 0x00000002 +#define HDAC_GCTL_UNSOL 0x00000100 + +/* WAKEEN - Wake Enable */ +#define HDAC_WAKEEN_SDIWEN_MASK 0x7fff +#define HDAC_WAKEEN_SDIWEN_SHIFT 0 + +/* STATESTS - State Change Status */ +#define HDAC_STATESTS_SDIWAKE_MASK 0x7fff +#define HDAC_STATESTS_SDIWAKE_SHIFT 0 + +#define HDAC_STATESTS_SDIWAKE(statests, n) \ + (((((statests) & HDAC_STATESTS_SDIWAKE_MASK) >> \ + HDAC_STATESTS_SDIWAKE_SHIFT) >> (n)) & 0x0001) + +/* GSTS - Global Status */ +#define HDAC_GSTS_FSTS 0x0002 + +/* INTCTL - Interrut Control */ +#define HDAC_INTCTL_SIE_MASK 0x3fffffff +#define HDAC_INTCTL_SIE_SHIFT 0 +#define HDAC_INTCTL_CIE 0x40000000 +#define HDAC_INTCTL_GIE 0x80000000 + +/* INTSTS - Interrupt Status */ +#define HDAC_INTSTS_SIS_MASK 0x3fffffff +#define HDAC_INTSTS_SIS_SHIFT 0 +#define HDAC_INTSTS_CIS 0x40000000 +#define HDAC_INTSTS_GIS 0x80000000 + +/* SSYNC - Stream Synchronization */ +#define HDAC_SSYNC_SSYNC_MASK 0x3fffffff +#define HDAC_SSYNC_SSYNC_SHIFT 0 + +/* CORBWP - CORB Write Pointer */ +#define HDAC_CORBWP_CORBWP_MASK 0x00ff +#define HDAC_CORBWP_CORBWP_SHIFT 0 + +/* CORBRP - CORB Read Pointer */ +#define HDAC_CORBRP_CORBRP_MASK 0x00ff +#define HDAC_CORBRP_CORBRP_SHIFT 0 +#define HDAC_CORBRP_CORBRPRST 0x8000 + +/* CORBCTL - CORB Control */ +#define HDAC_CORBCTL_CMEIE 0x01 +#define HDAC_CORBCTL_CORBRUN 0x02 + +/* CORBSTS - CORB Status */ +#define HDAC_CORBSTS_CMEI 0x01 + +/* CORBSIZE - CORB Size */ +#define HDAC_CORBSIZE_CORBSIZE_MASK 0x03 +#define HDAC_CORBSIZE_CORBSIZE_SHIFT 0 +#define HDAC_CORBSIZE_CORBSZCAP_MASK 0xf0 +#define HDAC_CORBSIZE_CORBSZCAP_SHIFT 4 + +#define HDAC_CORBSIZE_CORBSIZE_2 0x00 +#define HDAC_CORBSIZE_CORBSIZE_16 0x01 +#define HDAC_CORBSIZE_CORBSIZE_256 0x02 + +#define HDAC_CORBSIZE_CORBSZCAP_2 0x10 +#define HDAC_CORBSIZE_CORBSZCAP_16 0x20 +#define HDAC_CORBSIZE_CORBSZCAP_256 0x40 + +#define HDAC_CORBSIZE_CORBSIZE(corbsize) \ + (((corbsize) & HDAC_CORBSIZE_CORBSIZE_MASK) >> HDAC_CORBSIZE_CORBSIZE_SHIFT) + +/* RIRBWP - RIRB Write Pointer */ +#define HDAC_RIRBWP_RIRBWP_MASK 0x00ff +#define HDAC_RIRBWP_RIRBWP_SHIFT 0 +#define HDAC_RIRBWP_RIRBWPRST 0x8000 + +/* RINTCTN - Response Interrupt Count */ +#define HDAC_RINTCNT_MASK 0x00ff +#define HDAC_RINTCNT_SHIFT 0 + +/* RIRBCTL - RIRB Control */ +#define HDAC_RIRBCTL_RINTCTL 0x01 +#define HDAC_RIRBCTL_RIRBDMAEN 0x02 +#define HDAC_RIRBCTL_RIRBOIC 0x04 + +/* RIRBSTS - RIRB Status */ +#define HDAC_RIRBSTS_RINTFL 0x01 +#define HDAC_RIRBSTS_RIRBOIS 0x04 + +/* RIRBSIZE - RIRB Size */ +#define HDAC_RIRBSIZE_RIRBSIZE_MASK 0x03 +#define HDAC_RIRBSIZE_RIRBSIZE_SHIFT 0 +#define HDAC_RIRBSIZE_RIRBSZCAP_MASK 0xf0 +#define HDAC_RIRBSIZE_RIRBSZCAP_SHIFT 4 + +#define HDAC_RIRBSIZE_RIRBSIZE_2 0x00 +#define HDAC_RIRBSIZE_RIRBSIZE_16 0x01 +#define HDAC_RIRBSIZE_RIRBSIZE_256 0x02 + +#define HDAC_RIRBSIZE_RIRBSZCAP_2 0x10 +#define HDAC_RIRBSIZE_RIRBSZCAP_16 0x20 +#define HDAC_RIRBSIZE_RIRBSZCAP_256 0x40 + +#define HDAC_RIRBSIZE_RIRBSIZE(rirbsize) \ + (((rirbsize) & HDAC_RIRBSIZE_RIRBSIZE_MASK) >> HDAC_RIRBSIZE_RIRBSIZE_SHIFT) + +/* DPLBASE - DMA Position Lower Base Address */ +#define HDAC_DPLBASE_DPLBASE_MASK 0xffffff80 +#define HDAC_DPLBASE_DPLBASE_SHIFT 7 +#define HDAC_DPLBASE_DPLBASE_DMAPBE 0x00000001 + +/* SDCTL - Stream Descriptor Control */ +#define HDAC_SDCTL_SRST 0x000001 +#define HDAC_SDCTL_RUN 0x000002 +#define HDAC_SDCTL_IOCE 0x000004 +#define HDAC_SDCTL_FEIE 0x000008 +#define HDAC_SDCTL_DEIE 0x000010 +#define HDAC_SDCTL_STRIPE_MASK 0x030000 +#define HDAC_SDCTL_STRIPE_SHIFT 16 +#define HDAC_SDCTL_TP 0x040000 +#define HDAC_SDCTL_DIR 0x080000 +#define HDAC_SDCTL2_STRM_MASK 0xf0 +#define HDAC_SDCTL2_STRM_SHIFT 4 + +#define HDAC_SDSTS_DESE (1 << 4) +#define HDAC_SDSTS_FIFOE (1 << 3) +#define HDAC_SDSTS_BCIS (1 << 2) + +#endif diff --git a/sys/dev/sound/pci/spicds.h b/sys/dev/sound/pci/spicds.h new file mode 100644 index 000000000000..c999b4ce1aa8 --- /dev/null +++ b/sys/dev/sound/pci/spicds.h @@ -0,0 +1,116 @@ +/* + * Copyright (c) 2006 Konstantin Dimitrov <kosio.dimitrov@gmail.com> + * Copyright (c) 2001 Katsurajima Naoto <raven@katsurajima.seya.yokohama.jp> + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHERIN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THEPOSSIBILITY OF + * SUCH DAMAGE. + * + * $FreeBSD$ + */ + +/* supported CODECs */ +#define SPICDS_TYPE_AK4524 0 +#define SPICDS_TYPE_AK4528 1 +#define SPICDS_TYPE_WM8770 2 +#define SPICDS_TYPE_AK4358 3 +#define SPICDS_TYPE_AK4381 4 + +/* AK4524/AK4528 control registers */ +#define AK4524_POWER 0x00 +#define AK4528_POWER 0x00 +#define AK452X_POWER_PWDA 0x01 +#define AK452X_POWER_PWAD 0x02 +#define AK452X_POWER_PWVR 0x04 +#define AK4524_RESET 0x01 +#define AK4528_RESET 0x01 +#define AK452X_RESET_RSDA 0x01 +#define AK452X_RESET_RSAD 0x02 +#define AK4524_FORMAT 0x02 +#define AK4528_FORMAT 0x02 +#define AK452X_FORMAT_1X 0x00 +#define AK452X_FORMAT_2X 0x01 +#define AK452X_FORMAT_4X1 0x02 +#define AK452X_FORMAT_4X2 0x03 +#define AK452X_FORMAT_256FSN 0x00 +#define AK452X_FORMAT_512FSN 0x04 +#define AK452X_FORMAT_1024FSN 0x08 +#define AK452X_FORMAT_384FSN 0x10 +#define AK452X_FORMAT_768FSN 0x14 +#define AK452X_FORMAT_OM24IL16 0x00 +#define AK452X_FORMAT_OM24IL20 0x20 +#define AK452X_FORMAT_OM24IM24 0x40 +#define AK452X_FORMAT_I2S 0x60 +#define AK452X_FORMAT_OM24IL24 0x80 +#define AK4524_DVC 0x03 +#define AK452X_DVC_DEM441 0x00 +#define AK452X_DVC_DEMOFF 0x01 +#define AK452X_DVC_DEM48 0x02 +#define AK452X_DVC_DEM32 0x03 +#define AK452X_DVC_ZTM256 0x00 +#define AK452X_DVC_ZTM512 0x04 +#define AK452X_DVC_ZTM1024 0x08 +#define AK452X_DVC_ZTM2048 0x0c +#define AK452X_DVC_ZCE 0x10 +#define AK452X_DVC_HPFL 0x04 +#define AK452X_DVC_HPFR 0x08 +#define AK452X_DVC_SMUTE 0x80 +#define AK4524_LIPGA 0x04 +#define AK4524_RIPGA 0x05 +#define AK4524_LOATT 0x06 +#define AK4524_ROATT 0x07 +#define AK4528_LOATT 0x04 +#define AK4528_ROATT 0x05 + +/* WM8770 control registers */ +#define WM8770_AOATT_L1 0x00 +#define WM8770_AOATT_R1 0x01 +#define WM8770_AOATT_L2 0x02 +#define WM8770_AOATT_R2 0x03 +#define WM8770_AOATT_L3 0x04 +#define WM8770_AOATT_R3 0x05 +#define WM8770_AOATT_L4 0x06 +#define WM8770_AOATT_R4 0x07 +#define WM8770_AOATT_MAST 0x08 +#define WM8770_AOATT_UPDATE 0x100 + +/* AK4358 control registers */ +#define AK4358_LO1ATT 0x04 +#define AK4358_RO1ATT 0x05 +#define AK4358_OATT_ENABLE 0x80 + +/* AK4381 control registers */ +#define AK4381_LOATT 0x03 +#define AK4381_ROATT 0x04 + +struct spicds_info; + +typedef void (*spicds_ctrl)(void *, unsigned int, unsigned int, unsigned int); + +struct spicds_info *spicds_create(device_t dev, void *devinfo, int num, spicds_ctrl); +void spicds_destroy(struct spicds_info *codec); +void spicds_settype(struct spicds_info *codec, unsigned int type); +void spicds_setcif(struct spicds_info *codec, unsigned int cif); +void spicds_setformat(struct spicds_info *codec, unsigned int format); +void spicds_setdvc(struct spicds_info *codec, unsigned int dvc); +void spicds_init(struct spicds_info *codec); +void spicds_reinit(struct spicds_info *codec); +void spicds_set(struct spicds_info *codec, int dir, unsigned int left, unsigned int right); diff --git a/sys/modules/sound/driver/envy24/Makefile b/sys/modules/sound/driver/envy24/Makefile new file mode 100644 index 000000000000..ec1bf4c67bfb --- /dev/null +++ b/sys/modules/sound/driver/envy24/Makefile @@ -0,0 +1,9 @@ +# $FreeBSD$ + +.PATH: ${.CURDIR}/../../../../dev/sound/pci + +KMOD= snd_envy24 +SRCS= device_if.h bus_if.h pci_if.h +SRCS+= envy24.c + +.include <bsd.kmod.mk> diff --git a/sys/modules/sound/driver/envy24ht/Makefile b/sys/modules/sound/driver/envy24ht/Makefile new file mode 100644 index 000000000000..e6b0d452bb1b --- /dev/null +++ b/sys/modules/sound/driver/envy24ht/Makefile @@ -0,0 +1,9 @@ +# $FreeBSD$ + +.PATH: ${.CURDIR}/../../../../dev/sound/pci + +KMOD= snd_envy24ht +SRCS= device_if.h bus_if.h pci_if.h +SRCS+= envy24ht.c + +.include <bsd.kmod.mk> diff --git a/sys/modules/sound/driver/hda/Makefile b/sys/modules/sound/driver/hda/Makefile new file mode 100644 index 000000000000..8508b5d7e501 --- /dev/null +++ b/sys/modules/sound/driver/hda/Makefile @@ -0,0 +1,9 @@ +# $FreeBSD$ + +.PATH: ${.CURDIR}/../../../../dev/sound/pci/hda + +KMOD= snd_hda +SRCS= device_if.h bus_if.h pci_if.h channel_if.h mixer_if.h +SRCS+= hdac.c hdac_private.h hdac_reg.h hda_reg.h hdac.h + +.include <bsd.kmod.mk> diff --git a/sys/modules/sound/driver/spicds/Makefile b/sys/modules/sound/driver/spicds/Makefile new file mode 100644 index 000000000000..35ec8799e938 --- /dev/null +++ b/sys/modules/sound/driver/spicds/Makefile @@ -0,0 +1,9 @@ +# $FreeBSD$ + +.PATH: ${.CURDIR}/../../../../dev/sound/pci + +KMOD= snd_spicds +SRCS= device_if.h bus_if.h isa_if.h pci_if.h +SRCS+= spicds.c + +.include <bsd.kmod.mk> diff --git a/usr.sbin/sade/sade.8 b/usr.sbin/sade/sade.8 new file mode 100644 index 000000000000..1c5dc12975e0 --- /dev/null +++ b/usr.sbin/sade/sade.8 @@ -0,0 +1,73 @@ +.\" Copyright (c) 1997 +.\" Jordan Hubbard <jkh@FreeBSD.org>. All rights reserved. +.\" +.\" Redistribution and use in source and binary forms, with or without +.\" modification, are permitted provided that the following conditions +.\" are met: +.\" 1. Redistributions of source code must retain the above copyright +.\" notice, this list of conditions and the following disclaimer. +.\" 2. Redistributions in binary form must reproduce the above copyright +.\" notice, this list of conditions and the following disclaimer in the +.\" documentation and/or other materials provided with the distribution. +.\" +.\" THIS SOFTWARE IS PROVIDED BY Jordan Hubbard AND CONTRIBUTORS ``AS IS'' AND +.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +.\" ARE DISCLAIMED. IN NO EVENT SHALL Jordan Hubbard OR CONTRIBUTORS BE LIABLE +.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS +.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY +.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +.\" SUCH DAMAGE. +.\" +.\" $FreeBSD$ +.\" +.Dd August 8, 2006 +.Dt SADE 8 +.Os +.Sh NAME +.Nm sade +.Nd sysadmins disk editor +.Sh SYNOPSIS +.Nm +.Sh DESCRIPTION +The +.Nm +utility is used for various disk administration tasks on +.Fx +systems. +.Pp +It is generally invoked without arguments for the default +behavior, where the main menu is presented. +.Sh NOTES +The +.Nm +utility aims to provide a handy tool for disk management +tasks on an already installed system. +The goal is to save +some of the useful functionality of the old +.Xr sysinstall 8 +which +will be removed from the system in favor of the new installer. +.Sh SEE ALSO +.Xr sysinstall 8 +.Sh HISTORY +This version of +.Nm +first appeared in +.Fx 7.0 . +The code is extracted from the +.Xr sysinstall 8 +utility. +.Sh AUTHORS +.An Jordan K. Hubbard Aq jkh@FreeBSD.org +.Sh BUGS +The utility misses a lot of nice features, such as tools for +manipulating +.Xr gmirror 8 +or +.Xr gvinum 8 +stuff. +These will be added later. |