Remove the old dts imported tree.

The new one is in sys/contrib/device-tree

1 files changed, 0 insertions, 164 deletions

diff --git a/sys/gnu/dts/arm/at91-sama5d4_ma5d4evk.dts b/sys/gnu/dts/arm/at91-sama5d4_ma5d4evk.dts
deleted file mode 100644
index 4d7cee569ff2..000000000000
--- a/sys/gnu/dts/arm/at91-sama5d4_ma5d4evk.dts
+++ /dev/null
@@ -1,164 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2015 Marek Vasut <marex@denx.de>
- */
-
-/dts-v1/;
-#include "at91-sama5d4_ma5d4.dtsi"
-
-/ {
-	model = "Aries/DENX MA5D4EVK";
-	compatible = "aries,ma5d4evk", "denx,ma5d4evk", "atmel,sama5d4", "atmel,sama5";
-
-	chosen {
-		stdout-path = "serial3:115200n8";
-	};
-
-	ahb {
-		usb0: gadget@400000 {
-			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usba_vbus>;
-			status = "okay";
-		};
-
-		usb1: ohci@500000 {
-			num-ports = <3>;
-			atmel,vbus-gpio = <0
-					   &pioE 11 GPIO_ACTIVE_LOW
-					   &pioE 14 GPIO_ACTIVE_LOW
-					  >;
-			status = "okay";
-		};
-
-		usb2: ehci@600000 {
-			status = "okay";
-		};
-
-		apb {
-			hlcdc: hlcdc@f0000000 {
-				status = "okay";
-
-				hlcdc-display-controller {
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
-
-					port@0 {
-						hlcdc_panel_output: endpoint@0 {
-							reg = <0>;
-							remote-endpoint = <&panel_input>;
-						};
-					};
-				};
-
-			};
-
-			macb0: ethernet@f8020000 {
-				phy-mode = "rmii";
-				status = "okay";
-
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-			};
-
-			usart0: serial@f802c000 {
-				status = "okay";
-			};
-
-			usart1: serial@f8030000 {
-				status = "okay";
-			};
-
-			mmc1: mmc@fc000000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
-				vmmc-supply = <&vcc_mmc1_reg>;
-				vqmmc-supply = <&vcc_3v3_reg>;
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					cd-gpios = <&pioE 5 0>;
-				};
-			};
-
-			adc0: adc@fc034000 {
-				atmel,adc-ts-wires = <4>;
-				atmel,adc-ts-pressure-threshold = <10000>;
-			};
-
-
-			pinctrl@fc06a000 {
-				board {
-					pinctrl_mmc1_cd: mmc1_cd {
-						atmel,pins = <AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-					};
-					pinctrl_usba_vbus: usba_vbus {
-						atmel,pins =
-							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
-					};
-				};
-			};
-		};
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&hlcdc_pwm 0 50000 0>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-		status = "okay";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		status = "okay";
-
-		user1 {
-			label = "user1";
-			gpios = <&pioD 28 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		user2 {
-			label = "user2";
-			gpios = <&pioD 29 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		user3 {
-			label = "user3";
-			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	panel: panel {
-		/* Actually Ampire 800480R2 */
-		compatible = "foxlink,fl500wvr00-a0t";
-		backlight = <&backlight>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-
-		port@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			panel_input: endpoint@0 {
-				reg = <0>;
-				remote-endpoint = <&hlcdc_panel_output>;
-			};
-		};
-	};
-
-	vcc_mmc1_reg: fixedregulator_mmc1 {
-		compatible = "regulator-fixed";
-		gpio = <&pioE 17 GPIO_ACTIVE_LOW>;
-		regulator-name = "VDD MCI1";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc_3v3_reg>;
-	};
-};