Adaptec 174x EISA SCSI Host Adapter driver for CAM.

1 files changed, 283 insertions, 0 deletions

diff --git a/sys/dev/ahb/ahbreg.h b/sys/dev/ahb/ahbreg.h
new file mode 100644
index 000000000000..1bed89ebff4a
--- /dev/null
+++ b/sys/dev/ahb/ahbreg.h
@@ -0,0 +1,283 @@
+/*
+ * Hardware structure definitions for the Adaptec 174X CAM SCSI device driver.
+ *
+ * Copyright (c) 1998 Justin T. Gibbs
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice immediately at the beginning of the file, without modification,
+ *    this list of conditions, and the following disclaimer.
+ * 2. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ *	$Id$
+ */
+
+/* Resource Constatns */
+#define	AHB_NECB	64
+#define AHB_NSEG	32
+
+/* AHA1740 EISA ID, IO port range size, and offset from slot base */
+#define EISA_DEVICE_ID_ADAPTEC_1740  0x04900000
+#define	AHB_EISA_IOSIZE 0x100
+#define	AHB_EISA_SLOT_OFFSET 0xc00
+
+/* AHA1740 EISA board control registers (Offset from slot base) */
+#define	EBCTRL				0x084
+#define		CDEN			0x01
+
+/*
+ * AHA1740 EISA board mode registers (Offset from slot base)
+ */
+#define PORTADDR			0x0C0
+#define		PORTADDR_ENHANCED	0x80
+
+#define BIOSADDR			0x0C1
+
+#define	INTDEF				0x0C2
+#define		INT9			0x00
+#define		INT10			0x01
+#define		INT11			0x02
+#define		INT12			0x03
+#define		INT14			0x05
+#define		INT15			0x06
+#define		INTLEVEL		0x08
+#define		INTEN			0x10
+
+#define	SCSIDEF				0x0C3
+#define		HSCSIID			0x0F	/* our SCSI ID */
+#define		RSTBUS			0x10
+
+#define	BUSDEF				0x0C4
+#define		B0uS			0x00	/* give up bus immediatly */
+#define		B4uS			0x01	/* delay 4uSec. */
+#define		B8uS			0x02	/* delay 8uSec. */
+
+#define	RESV0				0x0C5
+
+#define	RESV1				0x0C6
+#define		EXTENDED_TRANS		0x01
+
+#define	RESV2				0x0C7
+
+/*
+ * AHA1740 ENHANCED mode mailbox control regs (Offset from slot base)
+ */
+#define MBOXOUT0			0x0D0
+#define MBOXOUT1			0x0D1
+#define MBOXOUT2			0x0D2
+#define MBOXOUT3			0x0D3
+
+#define	ATTN				0x0D4
+#define		ATTN_TARGMASK		0x0F
+#define		ATTN_IMMED		0x10
+#define		ATTN_STARTECB		0x40
+#define		ATTN_ABORTECB		0x50
+#define		ATTN_TARG_RESET		0x80
+
+#define	CONTROL				0x0D5
+#define		CNTRL_SET_HRDY		0x20
+#define		CNTRL_CLRINT		0x40
+#define		CNTRL_HARD_RST		0x80
+
+#define	INTSTAT				0x0D6
+#define		INTSTAT_TARGET_MASK	0x0F
+#define		INTSTAT_MASK		0xF0
+#define		INTSTAT_ECB_OK		0x10	/* ECB Completed w/out error */
+#define		INTSTAT_ECB_CMPWRETRY	0x50	/* ECB Completed w/retries */
+#define		INTSTAT_HW_ERR		0x70	/* Adapter Hardware Failure */
+#define		INTSTAT_IMMED_OK	0xA0	/* Immediate command complete */
+#define		INTSTAT_ECB_CMPWERR	0xC0	/* ECB Completed w/error */
+#define		INTSTAT_AEN_OCCURED	0xD0	/* Async Event Notification */
+#define		INTSTAT_IMMED_ERR	0xE0	/* Immediate command failed */
+
+#define HOSTSTAT			0x0D7
+#define		HOSTSTAT_MBOX_EMPTY	0x04
+#define		HOSTSTAT_INTPEND	0x02
+#define		HOSTSTAT_BUSY		0x01
+
+
+#define	MBOXIN0				0x0D8
+#define	MBOXIN1				0x0D9
+#define	MBOXIN2				0x0DA
+#define	MBOXIN3				0x0DB
+
+#define STATUS2				0x0DC
+#define	STATUS2_HOST_READY		0x01
+
+typedef enum {
+	IMMED_RESET		  = 0x000080,
+	IMMED_DEVICE_CLEAR_QUEUE  = 0x000480,
+	IMMED_ADAPTER_CLEAR_QUEUE = 0x000880,
+	IMMED_RESUME		  = 0x200090
+} immed_cmd;
+
+struct ecb_status {
+	/* Status Flags */
+	u_int16_t 	no_error      :1, /* Completed with no error */
+			data_underrun :1,
+				      :1,
+			ha_queue_full :1,
+			spec_check    :1,
+			data_overrun  :1,
+			chain_halted  :1,
+			intr_issued   :1,
+			status_avail  :1, /* status bytes 14-31 are valid */
+			sense_stored  :1,
+				      :1,
+			init_requied  :1,
+			major_error   :1,
+				      :1,
+			extended_ca   :1,
+				      :1;
+	/* Host Status */
+	u_int8_t	ha_status;
+	u_int8_t	scsi_status;
+	int32_t		resid_count;
+	u_int32_t	resid_addr;
+	u_int16_t	addit_status;
+	u_int8_t	sense_len;
+	u_int8_t	unused[9];
+	u_int8_t	cdb[6];
+};
+
+typedef enum {
+	HS_OK			= 0x00,
+	HS_CMD_ABORTED_HOST	= 0x04,
+	HS_CMD_ABORTED_ADAPTER	= 0x05,
+	HS_FIRMWARE_LOAD_REQ	= 0x08,
+	HS_TARGET_NOT_ASSIGNED	= 0x0A,
+	HS_SEL_TIMEOUT		= 0x11,
+	HS_DATA_RUN_ERR		= 0x12,
+	HS_UNEXPECTED_BUSFREE	= 0x13,
+	HS_INVALID_PHASE	= 0x14,
+	HS_INVALID_OPCODE	= 0x16,
+	HS_INVALID_CMD_LINK	= 0x17,
+	HS_INVALID_ECB_PARAM	= 0x18,
+	HS_DUP_TCB_RECEIVED	= 0x19,
+	HS_REQUEST_SENSE_FAILED	= 0x1A,
+	HS_TAG_MSG_REJECTED	= 0x1C,
+	HS_HARDWARE_ERR		= 0x20,
+	HS_ATN_TARGET_FAILED	= 0x21,
+	HS_SCSI_RESET_ADAPTER	= 0x22,
+	HS_SCSI_RESET_INCOMING	= 0x23,
+	HS_PROGRAM_CKSUM_ERROR	= 0x80
+} host_status;
+
+typedef enum {
+	ECBOP_NOP		 = 0x00,
+	ECBOP_INITIATOR_SCSI_CMD = 0x01,
+	ECBOP_RUN_DIAGNOSTICS	 = 0x05,
+	ECBOP_INITIALIZE_SCSI	 = 0x06, /* Set syncrate/disc/parity */
+	ECBOP_READ_SENSE	 = 0x08,
+	ECBOP_DOWNLOAD_FIRMWARE  = 0x09,
+	ECBOP_READ_HA_INQDATA	 = 0x0a,
+	ECBOP_TARGET_SCSI_CMD	 = 0x10
+} ecb_op;
+
+struct ha_inquiry_data {
+	struct	  scsi_inquiry_data scsi_data;
+	u_int8_t  release_date[8];
+	u_int8_t  release_time[8];
+	u_int16_t firmware_cksum;
+	u_int16_t reserved;
+	u_int16_t target_data[16];
+};
+
+struct hardware_ecb {
+	u_int16_t	opcode;
+	u_int16_t	flag_word1;
+#define	FW1_LINKED_CMD		0x0001
+#define FW1_DISABLE_INTR	0x0080
+#define FW1_SUPPRESS_URUN_ERR	0x0400
+#define	FW1_SG_ECB		0x1000
+#define FW1_ERR_STATUS_BLK_ONLY	0x4000
+#define FW1_AUTO_REQUEST_SENSE	0x8000
+	u_int16_t	flag_word2;
+#define FW2_LUN_MASK		0x0007
+#define FW2_TAG_ENB		0x0008
+#define FW2_TAG_TYPE		0x0030
+#define FW2_TAG_TYPE_SHIFT	4
+#define FW2_DISABLE_DISC	0x0040
+#define FW2_CHECK_DATA_DIR	0x0100
+#define FW2_DATA_DIR_IN		0x0200
+#define FW2_SUPRESS_TRANSFER	0x0400
+#define FW2_CALC_CKSUM		0x0800
+#define FW2_RECOVERY_ECB	0x4000
+#define FW2_NO_RETRY_ON_BUSY	0x8000
+	u_int16_t	reserved;
+	u_int32_t	data_ptr;
+	u_int32_t	data_len;
+	u_int32_t	status_ptr;
+	u_int32_t	link_ptr;
+	u_int32_t	reserved2;
+	u_int32_t	sense_ptr;
+	u_int8_t	sense_len;
+	u_int8_t	cdb_len;
+	u_int16_t	cksum;
+	u_int8_t	cdb[12];
+};
+
+typedef struct {
+	u_int32_t addr;
+	u_int32_t len;
+} ahb_sg_t;
+
+typedef enum {
+	ECB_FREE		= 0x0,
+	ECB_ACTIVE		= 0x1,
+	ECB_DEVICE_RESET	= 0x2,
+	ECB_SCSIBUS_RESET	= 0x4,
+	ECB_RELEASE_SIMQ	= 0x8
+} ecb_state;
+
+struct ecb {
+	struct hardware_ecb	 hecb;
+	struct ecb_status	 status;
+	struct scsi_sense_data	 sense;	
+	ahb_sg_t		 sg_list[AHB_NSEG];
+	SLIST_ENTRY(ecb)	 links;
+	ecb_state		 state;
+	union ccb		*ccb;
+	bus_dmamap_t		 dmamap;
+};
+
+struct ahb_softc {
+	bus_space_tag_t		 tag;
+	bus_space_handle_t	 bsh;
+	struct	cam_sim		*sim;
+	struct	cam_path	*path;
+	SLIST_HEAD(,ecb)	 free_ecbs;
+	LIST_HEAD(,ccb_hdr)	 pending_ccbs;
+	struct ecb		*ecb_array;
+	u_int32_t		 ecb_physbase;
+	bus_dma_tag_t		 buffer_dmat;	/* dmat for buffer I/O */
+	bus_dma_tag_t		 ecb_dmat;	/* dmat for our ecb array */
+	bus_dmamap_t		 ecb_dmamap;
+	volatile u_int32_t	 immed_cmd;
+	struct	ecb		*immed_ecb;
+	struct	ha_inquiry_data	*ha_inq_data;
+	u_int32_t		 ha_inq_physbase;
+	u_long			 unit;
+	u_int			 init_level;
+	u_int			 scsi_id;
+	u_int			 num_ecbs;
+	u_int			 extended_trans;
+	u_int8_t		 disc_permitted;
+	u_int8_t		 tags_permitted;
+};