Update our copies of the Device Tree Source to Linux 4.14vendor/device-tree/4.14

43 files changed, 280 insertions, 77 deletions

diff --git a/Bindings/net/anarion-gmac.txt b/Bindings/net/anarion-gmac.txt
new file mode 100644
index 000000000000..fe678965ae69
--- /dev/null
+++ b/Bindings/net/anarion-gmac.txt
@@ -0,0 +1,25 @@
+*  Adaptrum Anarion ethernet controller
+
+This device is a platform glue layer for stmmac.
+Please see stmmac.txt for the other unchanged properties.
+
+Required properties:
+ - compatible:  Should be "adaptrum,anarion-gmac", "snps,dwmac"
+ - phy-mode:    Should be "rgmii". Other modes are not currently supported.
+
+
+Examples:
+
+	gmac1: ethernet@f2014000 {
+		compatible = "adaptrum,anarion-gmac", "snps,dwmac";
+		reg = <0xf2014000 0x4000>, <0xf2018100 8>;
+
+		interrupt-parent = <&core_intc>;
+		interrupts = <21>;
+		interrupt-names = "macirq";
+
+		clocks = <&core_clk>;
+		clock-names = "stmmaceth";
+
+		phy-mode = "rgmii";
+	};
diff --git a/Bindings/net/brcm,amac.txt b/Bindings/net/brcm,amac.txt
index ad16c1f481f7..0bfad656a9ff 100644
--- a/Bindings/net/brcm,amac.txt
+++ b/Bindings/net/brcm,amac.txt
@@ -27,5 +27,4 @@ amac0: ethernet@18022000 {
 	      <0x18110000 0x1000>;
 	reg-names = "amac_base", "idm_base";
 	interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-	status = "disabled";
 };
diff --git a/Bindings/net/broadcom-bluetooth.txt b/Bindings/net/broadcom-bluetooth.txt
new file mode 100644
index 000000000000..4194ff7e6ee6
--- /dev/null
+++ b/Bindings/net/broadcom-bluetooth.txt
@@ -0,0 +1,35 @@
+Broadcom Bluetooth Chips
+---------------------
+
+This documents the binding structure and common properties for serial
+attached Broadcom devices.
+
+Serial attached Broadcom devices shall be a child node of the host UART
+device the slave device is attached to.
+
+Required properties:
+
+ - compatible: should contain one of the following:
+   * "brcm,bcm43438-bt"
+
+Optional properties:
+
+ - max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt
+ - shutdown-gpios: GPIO specifier, used to enable the BT module
+ - device-wakeup-gpios: GPIO specifier, used to wakeup the controller
+ - host-wakeup-gpios: GPIO specifier, used to wakeup the host processor
+ - clocks: clock specifier if external clock provided to the controller
+ - clock-names: should be "extclk"
+
+
+Example:
+
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart2_pins>;
+
+       bluetooth {
+               compatible = "brcm,bcm43438-bt";
+               max-speed = <921600>;
+       };
+};
diff --git a/Bindings/net/btusb.txt b/Bindings/net/btusb.txt
index 01fa2d4188d4..9c5e663fa1af 100644
--- a/Bindings/net/btusb.txt
+++ b/Bindings/net/btusb.txt
@@ -29,7 +29,6 @@ Example:
 Following example uses irq pin number 3 of gpio0 for out of band wake-on-bt:
 
 &usb_host1_ehci {
-    status = "okay";
     #address-cells = <1>;
     #size-cells = <0>;
 
diff --git a/Bindings/net/can/c_can.txt b/Bindings/net/can/c_can.txt
index 5a1d8b0c39e9..2d504256b0d8 100644
--- a/Bindings/net/can/c_can.txt
+++ b/Bindings/net/can/c_can.txt
@@ -11,9 +11,20 @@ Required properties:
 - interrupts		: property with a value describing the interrupt
 			  number
 
-Optional properties:
+The following are mandatory properties for DRA7x, AM33xx and AM43xx SoCs only:
 - ti,hwmods		: Must be "d_can<n>" or "c_can<n>", n being the
 			  instance number
+
+The following are mandatory properties for Keystone 2 66AK2G SoCs only:
+- power-domains		: Should contain a phandle to a PM domain provider node
+			  and an args specifier containing the DCAN device id
+			  value. This property is as per the binding,
+			  Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
+- clocks		: CAN functional clock phandle. This property is as per the
+			  binding,
+			  Documentation/devicetree/bindings/clock/ti,sci-clk.txt
+
+Optional properties:
 - syscon-raminit	: Handle to system control region that contains the
 			  RAMINIT register, register offset to the RAMINIT
 			  register and the CAN instance number (0 offset).
diff --git a/Bindings/net/can/m_can.txt b/Bindings/net/can/m_can.txt
index 9e331777c203..78138333ff7a 100644
--- a/Bindings/net/can/m_can.txt
+++ b/Bindings/net/can/m_can.txt
@@ -56,7 +56,6 @@ m_can1: can@020e8000 {
 		 <&clks IMX6SX_CLK_CANFD>;
 	clock-names = "hclk", "cclk";
 	bosch,mram-cfg = <0x0 0 0 32 0 0 0 1>;
-	status = "disabled";
 };
 
 Board dts:
diff --git a/Bindings/net/dsa/ksz.txt b/Bindings/net/dsa/ksz.txt
index 0ab8b39d0b30..fd23904ac68e 100644
--- a/Bindings/net/dsa/ksz.txt
+++ b/Bindings/net/dsa/ksz.txt
@@ -24,7 +24,6 @@ Ethernet switch connected via SPI to the host, CPU port wired to eth0:
                                              pinctrl-0 = <&pinctrl_spi_ksz>;
                                              cs-gpios = <&pioC 25 0>;
                                              id = <1>;
-                                             status = "okay";
 
                                              ksz9477: ksz9477@0 {
                                                              compatible = "microchip,ksz9477";
@@ -34,7 +33,6 @@ Ethernet switch connected via SPI to the host, CPU port wired to eth0:
                                                              spi-cpha;
                                                              spi-cpol;
 
-                                                             status = "okay";
                                                              ports {
                                                                              #address-cells = <1>;
                                                                              #size-cells = <0>;
diff --git a/Bindings/net/dsa/lan9303.txt b/Bindings/net/dsa/lan9303.txt
index 04f2965a4467..4448d063ddf6 100644
--- a/Bindings/net/dsa/lan9303.txt
+++ b/Bindings/net/dsa/lan9303.txt
@@ -27,7 +27,6 @@ Example:
 I2C managed mode:
 
 	master: masterdevice@X {
-		status = "okay";
 
 		fixed-link { /* RMII fixed link to LAN9303 */
 			speed = <100>;
@@ -38,7 +37,6 @@ I2C managed mode:
 	switch: switch@a {
 		compatible = "smsc,lan9303-i2c";
 		reg = <0xa>;
-		status = "okay";
 		reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
 		reset-duration = <200>;
 
@@ -67,7 +65,6 @@ I2C managed mode:
 MDIO managed mode:
 
 	master: masterdevice@X {
-		status = "okay";
 		phy-handle = <&switch>;
 
 		mdio {
diff --git a/Bindings/net/ethernet.txt b/Bindings/net/ethernet.txt
index 7da86f22a13b..2974e63ba311 100644
--- a/Bindings/net/ethernet.txt
+++ b/Bindings/net/ethernet.txt
@@ -1,5 +1,9 @@
 The following properties are common to the Ethernet controllers:
 
+NOTE: All 'phy*' properties documented below are Ethernet specific. For the
+generic PHY 'phys' property, see
+Documentation/devicetree/bindings/phy/phy-bindings.txt.
+
 - local-mac-address: array of 6 bytes, specifies the MAC address that was
   assigned to the network device;
 - mac-address: array of 6 bytes, specifies the MAC address that was last used by
diff --git a/Bindings/net/ftgmac100.txt b/Bindings/net/ftgmac100.txt
index c1ce1680246f..72e7aaf7242e 100644
--- a/Bindings/net/ftgmac100.txt
+++ b/Bindings/net/ftgmac100.txt
@@ -30,6 +30,5 @@ Example:
 		compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
 		reg = <0x1e660000 0x180>;
 		interrupts = <2>;
-		status = "okay";
 		use-ncsi;
 	};
diff --git a/Bindings/net/marvell-armada-370-neta.txt b/Bindings/net/marvell-armada-370-neta.txt
index ae4234ca4ee4..bedcfd5a52cd 100644
--- a/Bindings/net/marvell-armada-370-neta.txt
+++ b/Bindings/net/marvell-armada-370-neta.txt
@@ -41,7 +41,6 @@ ethernet@70000 {
 	interrupts = <8>;
 	clocks = <&gate_clk 4>;
 	tx-csum-limit = <9800>
-	status = "okay";
 	phy = <&phy0>;
 	phy-mode = "rgmii-id";
 	buffer-manager = <&bm>;
diff --git a/Bindings/net/marvell-bt-8xxx.txt b/Bindings/net/marvell-bt-8xxx.txt
index 9be1059ff03f..3d27c68613a6 100644
--- a/Bindings/net/marvell-bt-8xxx.txt
+++ b/Bindings/net/marvell-bt-8xxx.txt
@@ -44,7 +44,6 @@ Example for SDIO device follows (calibration data is also available in
 below example).
 
 &mmc3 {
-	status = "okay";
 	vmmc-supply = <&wlan_en_reg>;
 	bus-width = <4>;
 	cap-power-off-card;
@@ -70,7 +69,6 @@ below example).
 Example for USB device:
 
 &usb_host1_ohci {
-    status = "okay";
     #address-cells = <1>;
     #size-cells = <0>;
 
diff --git a/Bindings/net/marvell-neta-bm.txt b/Bindings/net/marvell-neta-bm.txt
index c1b1d7c3bde1..07b31050dbe5 100644
--- a/Bindings/net/marvell-neta-bm.txt
+++ b/Bindings/net/marvell-neta-bm.txt
@@ -31,7 +31,6 @@ bm: bm@c8000 {
 	reg = <0xc8000 0xac>;
 	clocks = <&gateclk 13>;
 	internal-mem = <&bm_bppi>;
-	status = "okay";
 	pool2,capacity = <4096>;
 	pool1,pkt-size = <512>;
 };
@@ -45,5 +44,4 @@ bm_bppi: bm-bppi {
 	#address-cells = <1>;
 	#size-cells = <1>;
 	clocks = <&gateclk 13>;
-	status = "okay";
 };
diff --git a/Bindings/net/marvell-pp2.txt b/Bindings/net/marvell-pp2.txt
index 6b4956beff8c..1814fa13f6ab 100644
--- a/Bindings/net/marvell-pp2.txt
+++ b/Bindings/net/marvell-pp2.txt
@@ -21,8 +21,9 @@ Required properties:
 	- main controller clock (for both armada-375-pp2 and armada-7k-pp2)
 	- GOP clock (for both armada-375-pp2 and armada-7k-pp2)
 	- MG clock (only for armada-7k-pp2)
-- clock-names: names of used clocks, must be "pp_clk", "gop_clk" and
-  "mg_clk" (the latter only for armada-7k-pp2).
+	- AXI clock (only for armada-7k-pp2)
+- clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk"
+  and "axi_clk" (the 2 latter only for armada-7k-pp2).
 
 The ethernet ports are represented by subnodes. At least one port is
 required.
@@ -41,6 +42,11 @@ Optional properties (port):
 - marvell,loopback: port is loopback mode
 - phy: a phandle to a phy node defining the PHY address (as the reg
   property, a single integer).
+- interrupt-names: if more than a single interrupt for rx is given, must
+                   be the name associated to the interrupts listed. Valid
+                   names are: "tx-cpu0", "tx-cpu1", "tx-cpu2", "tx-cpu3",
+		   "rx-shared", "link".
+- marvell,system-controller: a phandle to the system controller.
 
 Example for marvell,armada-375-pp2:
 
@@ -52,12 +58,10 @@ ethernet@f0000 {
 	      <0xc5000 0x100>;
 	clocks = <&gateclk 3>, <&gateclk 19>;
 	clock-names = "pp_clk", "gop_clk";
-	status = "okay";
 
 	eth0: eth0@c4000 {
 		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 		port-id = <0>;
-		status = "okay";
 		phy = <&phy0>;
 		phy-mode = "gmii";
 	};
@@ -65,7 +69,6 @@ ethernet@f0000 {
 	eth1: eth1@c5000 {
 		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 		port-id = <1>;
-		status = "okay";
 		phy = <&phy3>;
 		phy-mode = "gmii";
 	};
@@ -76,23 +79,42 @@ Example for marvell,armada-7k-pp2:
 cpm_ethernet: ethernet@0 {
 	compatible = "marvell,armada-7k-pp22";
 	reg = <0x0 0x100000>, <0x129000 0xb000>;
-	clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>, <&cpm_syscon0 1 5>;
-	clock-names = "pp_clk", "gop_clk", "gp_clk";
+	clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>,
+		 <&cpm_syscon0 1 5>, <&cpm_syscon0 1 18>;
+	clock-names = "pp_clk", "gop_clk", "gp_clk", "axi_clk";
 
 	eth0: eth0 {
-		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
+			     <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
+			     <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
+			     <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
+			     <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
+				  "tx-cpu3", "rx-shared";
 		port-id = <0>;
 		gop-port-id = <0>;
 	};
 
 	eth1: eth1 {
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
+			     <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
+			     <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
+			     <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
+				  "tx-cpu3", "rx-shared";
 		port-id = <1>;
 		gop-port-id = <2>;
 	};
 
 	eth2: eth2 {
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
+			     <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
+			     <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
+			     <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
+				  "tx-cpu3", "rx-shared";
 		port-id = <2>;
 		gop-port-id = <3>;
 	};
diff --git a/Bindings/net/mediatek-net.txt b/Bindings/net/mediatek-net.txt
index c7194e87d5f4..214eaa9a6683 100644
--- a/Bindings/net/mediatek-net.txt
+++ b/Bindings/net/mediatek-net.txt
@@ -7,24 +7,32 @@ have dual GMAC each represented by a child node..
 * Ethernet controller node
 
 Required properties:
-- compatible: Should be "mediatek,mt2701-eth"
+- compatible: Should be
+		"mediatek,mt2701-eth": for MT2701 SoC
+		"mediatek,mt7623-eth", "mediatek,mt2701-eth": for MT7623 SoC
+		"mediatek,mt7622-eth": for MT7622 SoC
 - reg: Address and length of the register set for the device
 - interrupts: Should contain the three frame engines interrupts in numeric
 	order. These are fe_int0, fe_int1 and fe_int2.
 - clocks: the clock used by the core
 - clock-names: the names of the clock listed in the clocks property. These are
-	"ethif", "esw", "gp2", "gp1"
+	"ethif", "esw", "gp2", "gp1" : For MT2701 and MT7623 SoC
+        "ethif", "esw", "gp0", "gp1", "gp2", "sgmii_tx250m", "sgmii_rx250m",
+	"sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck", "eth2pll" : For MT7622 SoC
 - power-domains: phandle to the power domain that the ethernet is part of
-- resets: Should contain a phandle to the ethsys reset signal
-- reset-names: Should contain the reset signal name "eth"
+- resets: Should contain phandles to the ethsys reset signals
+- reset-names: Should contain the names of reset signal listed in the resets
+		property
+		These are "fe", "gmac" and "ppe"
 - mediatek,ethsys: phandle to the syscon node that handles the port setup
+- mediatek,sgmiisys: phandle to the syscon node that handles the SGMII setup
+	which is required for those SoCs equipped with SGMII such as MT7622 SoC.
 - mediatek,pctl: phandle to the syscon node that handles the ports slew rate
 	and driver current
 
 Optional properties:
 - interrupt-parent: Should be the phandle for the interrupt controller
   that services interrupts for this device
-
 * Ethernet MAC node
 
 Required properties:
diff --git a/Bindings/net/meson-dwmac.txt b/Bindings/net/meson-dwmac.txt
index 0703ad3f3c1e..354dd9896bb5 100644
--- a/Bindings/net/meson-dwmac.txt
+++ b/Bindings/net/meson-dwmac.txt
@@ -66,5 +66,4 @@ Example for GXBB:
 				<&clkc CLKID_MPLL2>;
 		clock-names = "stmmaceth", "clkin0", "clkin1";
 		phy-mode = "rgmii";
-		status = "disabled";
 	};
diff --git a/Bindings/net/micrel-ksz90x1.txt b/Bindings/net/micrel-ksz90x1.txt
index c35b5b428a7f..42a248301615 100644
--- a/Bindings/net/micrel-ksz90x1.txt
+++ b/Bindings/net/micrel-ksz90x1.txt
@@ -69,7 +69,6 @@ Examples:
 		};
 	};
 	ethernet@70000 {
-		status = "okay";
 		phy = <&phy0>;
 		phy-mode = "rgmii-id";
 	};
diff --git a/Bindings/net/microchip,enc28j60.txt b/Bindings/net/microchip,enc28j60.txt
index 1dc3bc75539d..44dff53d4dda 100644
--- a/Bindings/net/microchip,enc28j60.txt
+++ b/Bindings/net/microchip,enc28j60.txt
@@ -33,7 +33,6 @@ Example (for NXP i.MX28 with pin control stuff for GPIO irq):
                 compatible = "fsl,imx28-spi";
                 pinctrl-names = "default";
                 pinctrl-0 = <&spi2_pins_b &spi2_sck_cfg>;
-                status = "okay";
 
                 enc28j60: ethernet@0 {
                         compatible = "microchip,enc28j60";
diff --git a/Bindings/net/nfc/nfcmrvl.txt b/Bindings/net/nfc/nfcmrvl.txt
index 76df9173825a..c9b35251bb20 100644
--- a/Bindings/net/nfc/nfcmrvl.txt
+++ b/Bindings/net/nfc/nfcmrvl.txt
@@ -25,7 +25,6 @@ Optional I2C-based chip specific properties:
 Example (for ARM-based BeagleBoard Black with 88W8887 on UART5):
 
 &uart5 {
-	status = "okay";
 
 	nfcmrvluart: nfcmrvluart@5 {
 		compatible = "marvell,nfc-uart";
@@ -41,7 +40,6 @@ Example (for ARM-based BeagleBoard Black with 88W8887 on UART5):
 Example (for ARM-based BeagleBoard Black with 88W8887 on I2C1):
 
 &i2c1 {
-	status = "okay";
 	clock-frequency = <400000>;
 
 	nfcmrvli2c0: i2c@1 {
diff --git a/Bindings/net/nfc/nxp-nci.txt b/Bindings/net/nfc/nxp-nci.txt
index 5b6cd9b3f628..92486733df71 100644
--- a/Bindings/net/nfc/nxp-nci.txt
+++ b/Bindings/net/nfc/nxp-nci.txt
@@ -17,7 +17,6 @@ Example (for ARM-based BeagleBone with NPC100 NFC controller on I2C2):
 
 &i2c2 {
 
-	status = "okay";
 
 	npc100: npc100@29 {
 
diff --git a/Bindings/net/nfc/pn533-i2c.txt b/Bindings/net/nfc/pn533-i2c.txt
index 1aea822d4530..122460e42e3c 100644
--- a/Bindings/net/nfc/pn533-i2c.txt
+++ b/Bindings/net/nfc/pn533-i2c.txt
@@ -15,7 +15,6 @@ Example (for ARM-based BeagleBone with PN532 on I2C2):
 
 &i2c2 {
 
-	status = "okay";
 
 	pn532: pn532@24 {
 
diff --git a/Bindings/net/nfc/pn544.txt b/Bindings/net/nfc/pn544.txt
index dab69f36167c..538a86f7b2b0 100644
--- a/Bindings/net/nfc/pn544.txt
+++ b/Bindings/net/nfc/pn544.txt
@@ -17,7 +17,6 @@ Example (for ARM-based BeagleBone with PN544 on I2C2):
 
 &i2c2 {
 
-	status = "okay";
 
 	pn544: pn544@28 {
 
diff --git a/Bindings/net/nfc/s3fwrn5.txt b/Bindings/net/nfc/s3fwrn5.txt
index fb1e75facf1b..ed5b3eaadb39 100644
--- a/Bindings/net/nfc/s3fwrn5.txt
+++ b/Bindings/net/nfc/s3fwrn5.txt
@@ -12,7 +12,6 @@ Required properties:
 Example:
 
 &hsi2c_4 {
-	status = "okay";
 	s3fwrn5@27 {
 		compatible = "samsung,s3fwrn5-i2c";
 
diff --git a/Bindings/net/nfc/st-nci-i2c.txt b/Bindings/net/nfc/st-nci-i2c.txt
index 263732e8879f..b46d473be425 100644
--- a/Bindings/net/nfc/st-nci-i2c.txt
+++ b/Bindings/net/nfc/st-nci-i2c.txt
@@ -20,7 +20,6 @@ Example (for ARM-based BeagleBoard xM with ST21NFCB on I2C2):
 
 &i2c2 {
 
-	status = "okay";
 
 	st21nfcb: st21nfcb@8 {
 
diff --git a/Bindings/net/nfc/st-nci-spi.txt b/Bindings/net/nfc/st-nci-spi.txt
index 711ca85a363d..54ce8e7ac681 100644
--- a/Bindings/net/nfc/st-nci-spi.txt
+++ b/Bindings/net/nfc/st-nci-spi.txt
@@ -19,7 +19,6 @@ Example (for ARM-based BeagleBoard xM with ST21NFCB on SPI4):
 
 &mcspi4 {
 
-	status = "okay";
 
 	st21nfcb: st21nfcb@0 {
 
diff --git a/Bindings/net/nfc/st21nfca.txt b/Bindings/net/nfc/st21nfca.txt
index 7bb2e213d6f9..5ee9440fa9ad 100644
--- a/Bindings/net/nfc/st21nfca.txt
+++ b/Bindings/net/nfc/st21nfca.txt
@@ -20,7 +20,6 @@ Example (for ARM-based BeagleBoard xM with ST21NFCA on I2C2):
 
 &i2c2 {
 
-	status = "okay";
 
 	st21nfca: st21nfca@1 {
 
diff --git a/Bindings/net/nfc/st95hf.txt b/Bindings/net/nfc/st95hf.txt
index ea3178bc9ddd..08a202e00d47 100644
--- a/Bindings/net/nfc/st95hf.txt
+++ b/Bindings/net/nfc/st95hf.txt
@@ -35,12 +35,10 @@ spi@9840000 {
 	#address-cells = <1>;
 	#size-cells = <0>;
 	cs-gpios = <&pio0 4>;
-	status = "okay";
 
 	st95hf@0{
 		reg = <0>;
 		compatible = "st,st95hf";
-		status = "okay";
 		spi-max-frequency = <1000000>;
 		enable-gpio = <&pio4 0>;
 		interrupt-parent = <&pio0>;
diff --git a/Bindings/net/nfc/trf7970a.txt b/Bindings/net/nfc/trf7970a.txt
index 60c833d62181..5ca9362ef127 100644
--- a/Bindings/net/nfc/trf7970a.txt
+++ b/Bindings/net/nfc/trf7970a.txt
@@ -23,7 +23,6 @@ Optional SoC Specific Properties:
 Example (for ARM-based BeagleBone with TRF7970A on SPI1):
 
 &spi1 {
-	status = "okay";
 
 	nfc@0 {
 		compatible = "ti,trf7970a";
@@ -41,6 +40,5 @@ Example (for ARM-based BeagleBone with TRF7970A on SPI1):
 		irq-status-read-quirk;
 		en2-rf-quirk;
 		clock-frequency = <27120000>;
-		status = "okay";
 	};
 };
diff --git a/Bindings/net/oxnas-dwmac.txt b/Bindings/net/oxnas-dwmac.txt
index df0534e2eda1..d7117a22fd87 100644
--- a/Bindings/net/oxnas-dwmac.txt
+++ b/Bindings/net/oxnas-dwmac.txt
@@ -35,5 +35,4 @@ etha: ethernet@40400000 {
 	/* Regmap for sys registers */
 	oxsemi,sys-ctrl = <&sys>;
 
-	status = "disabled";
 };
diff --git a/Bindings/net/phy.txt b/Bindings/net/phy.txt
index b55857696fc3..77d0b2a61ffa 100644
--- a/Bindings/net/phy.txt
+++ b/Bindings/net/phy.txt
@@ -2,11 +2,7 @@ PHY nodes
 
 Required properties:
 
- - interrupts : <a b> where a is the interrupt number and b is a
-   field that represents an encoding of the sense and level
-   information for the interrupt.  This should be encoded based on
-   the information in section 2) depending on the type of interrupt
-   controller you have.
+ - interrupts : interrupt specifier for the sole interrupt.
  - interrupt-parent : the phandle for the interrupt controller that
    services interrupts for this device.
  - reg : The ID number for the phy, usually a small integer
@@ -52,11 +48,16 @@ Optional Properties:
   Mark the corresponding energy efficient ethernet mode as broken and
   request the ethernet to stop advertising it.
 
+- phy-is-integrated: If set, indicates that the PHY is integrated into the same
+  physical package as the Ethernet MAC. If needed, muxers should be configured
+  to ensure the integrated PHY is used. The absence of this property indicates
+  the muxers should be configured so that the external PHY is used.
+
 Example:
 
 ethernet-phy@0 {
 	compatible = "ethernet-phy-id0141.0e90", "ethernet-phy-ieee802.3-c22";
-	interrupt-parent = <40000>;
-	interrupts = <35 1>;
+	interrupt-parent = <&PIC>;
+	interrupts = <35 IRQ_TYPE_EDGE_RISING>;
 	reg = <0>;
 };
diff --git a/Bindings/net/qca,qca7000.txt b/Bindings/net/qca,qca7000.txt
index 6d9efb2eb9a5..3987846b3fd3 100644
--- a/Bindings/net/qca,qca7000.txt
+++ b/Bindings/net/qca,qca7000.txt
@@ -41,7 +41,6 @@ ssp2: spi@80014000 {
 	compatible = "fsl,imx28-spi";
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi2_pins_a>;
-	status = "okay";
 
 	qca7000: ethernet@0 {
 		compatible = "qca,qca7000";
@@ -78,7 +77,6 @@ auart0: serial@8006a000 {
 	reg = <0x8006a000 0x2000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&auart0_2pins_a>;
-	status = "okay";
 
 	qca7000: ethernet {
 		compatible = "qca,qca7000";
diff --git a/Bindings/net/renesas,ravb.txt b/Bindings/net/renesas,ravb.txt
index b519503be51a..16723535e1aa 100644
--- a/Bindings/net/renesas,ravb.txt
+++ b/Bindings/net/renesas,ravb.txt
@@ -4,19 +4,25 @@ This file provides information on what the device node for the Ethernet AVB
 interface contains.
 
 Required properties:
-- compatible: "renesas,etheravb-r8a7790" if the device is a part of R8A7790 SoC.
-	      "renesas,etheravb-r8a7791" if the device is a part of R8A7791 SoC.
-	      "renesas,etheravb-r8a7792" if the device is a part of R8A7792 SoC.
-	      "renesas,etheravb-r8a7793" if the device is a part of R8A7793 SoC.
-	      "renesas,etheravb-r8a7794" if the device is a part of R8A7794 SoC.
-	      "renesas,etheravb-r8a7795" if the device is a part of R8A7795 SoC.
-	      "renesas,etheravb-r8a7796" if the device is a part of R8A7796 SoC.
-	      "renesas,etheravb-rcar-gen2" for generic R-Car Gen 2 compatible interface.
-	      "renesas,etheravb-rcar-gen3" for generic R-Car Gen 3 compatible interface.
+- compatible: Must contain one or more of the following:
+      - "renesas,etheravb-r8a7743" for the R8A7743 SoC.
+      - "renesas,etheravb-r8a7745" for the R8A7745 SoC.
+      - "renesas,etheravb-r8a7790" for the R8A7790 SoC.
+      - "renesas,etheravb-r8a7791" for the R8A7791 SoC.
+      - "renesas,etheravb-r8a7792" for the R8A7792 SoC.
+      - "renesas,etheravb-r8a7793" for the R8A7793 SoC.
+      - "renesas,etheravb-r8a7794" for the R8A7794 SoC.
+      - "renesas,etheravb-rcar-gen2" as a fallback for the above
+		R-Car Gen2 and RZ/G1 devices.
 
-	      When compatible with the generic version, nodes must list the
-	      SoC-specific version corresponding to the platform first
-	      followed by the generic version.
+      - "renesas,etheravb-r8a7795" for the R8A7795 SoC.
+      - "renesas,etheravb-r8a7796" for the R8A7796 SoC.
+      - "renesas,etheravb-rcar-gen3" as a fallback for the above
+		R-Car Gen3 devices.
+
+	When compatible with the generic version, nodes must list the
+	SoC-specific version corresponding to the platform first followed by
+	the generic version.
 
 - reg: offset and length of (1) the register block and (2) the stream buffer.
 - interrupts: A list of interrupt-specifiers, one for each entry in
diff --git a/Bindings/net/rockchip-dwmac.txt b/Bindings/net/rockchip-dwmac.txt
index 8f427550720a..9c16ee2965a2 100644
--- a/Bindings/net/rockchip-dwmac.txt
+++ b/Bindings/net/rockchip-dwmac.txt
@@ -4,12 +4,14 @@ The device node has following properties.
 
 Required properties:
  - compatible: should be "rockchip,<name>-gamc"
+   "rockchip,rk3128-gmac": found on RK312x SoCs
    "rockchip,rk3228-gmac": found on RK322x SoCs
    "rockchip,rk3288-gmac": found on RK3288 SoCs
    "rockchip,rk3328-gmac": found on RK3328 SoCs
    "rockchip,rk3366-gmac": found on RK3366 SoCs
    "rockchip,rk3368-gmac": found on RK3368 SoCs
    "rockchip,rk3399-gmac": found on RK3399 SoCs
+   "rockchip,rv1108-gmac": found on RV1108 SoCs
  - reg: addresses and length of the register sets for the device.
  - interrupts: Should contain the GMAC interrupts.
  - interrupt-names: Should contain the interrupt names "macirq".
@@ -70,5 +72,4 @@ gmac: ethernet@ff290000 {
 	tx_delay = <0x30>;
 	rx_delay = <0x10>;
 
-	status = "ok";
 };
diff --git a/Bindings/net/sff,sfp.txt b/Bindings/net/sff,sfp.txt
new file mode 100644
index 000000000000..60e970ce10ee
--- /dev/null
+++ b/Bindings/net/sff,sfp.txt
@@ -0,0 +1,76 @@
+Small Form Factor (SFF) Committee Small Form-factor Pluggable (SFP)
+Transceiver
+
+Required properties:
+
+- compatible : must be "sff,sfp"
+
+Optional Properties:
+
+- i2c-bus : phandle of an I2C bus controller for the SFP two wire serial
+  interface
+
+- mod-def0-gpios : GPIO phandle and a specifier of the MOD-DEF0 (AKA Mod_ABS)
+  module presence input gpio signal, active (module absent) high
+
+- los-gpios : GPIO phandle and a specifier of the Receiver Loss of Signal
+  Indication input gpio signal, active (signal lost) high
+
+- tx-fault-gpios : GPIO phandle and a specifier of the Module Transmitter
+  Fault input gpio signal, active (fault condition) high
+
+- tx-disable-gpios : GPIO phandle and a specifier of the Transmitter Disable
+  output gpio signal, active (Tx disable) high
+
+- rate-select0-gpios : GPIO phandle and a specifier of the Rx Signaling Rate
+  Select (AKA RS0) output gpio signal, low: low Rx rate, high: high Rx rate
+
+- rate-select1-gpios : GPIO phandle and a specifier of the Tx Signaling Rate
+  Select (AKA RS1) output gpio signal (SFP+ only), low: low Tx rate, high:
+  high Tx rate
+
+Example #1: Direct serdes to SFP connection
+
+sfp_eth3: sfp-eth3 {
+	compatible = "sff,sfp";
+	i2c-bus = <&sfp_1g_i2c>;
+	los-gpios = <&cpm_gpio2 22 GPIO_ACTIVE_HIGH>;
+	mod-def0-gpios = <&cpm_gpio2 21 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&cpm_sfp_1g_pins &cps_sfp_1g_pins>;
+	tx-disable-gpios = <&cps_gpio1 24 GPIO_ACTIVE_HIGH>;
+	tx-fault-gpios = <&cpm_gpio2 19 GPIO_ACTIVE_HIGH>;
+};
+
+&cps_emac3 {
+	phy-names = "comphy";
+	phys = <&cps_comphy5 0>;
+	sfp = <&sfp_eth3>;
+};
+
+Example #2: Serdes to PHY to SFP connection
+
+sfp_eth0: sfp-eth0 {
+	compatible = "sff,sfp";
+	i2c-bus = <&sfpp0_i2c>;
+	los-gpios = <&cps_gpio1 28 GPIO_ACTIVE_HIGH>;
+	mod-def0-gpios = <&cps_gpio1 27 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&cps_sfpp0_pins>;
+	tx-disable-gpios = <&cps_gpio1 29 GPIO_ACTIVE_HIGH>;
+	tx-fault-gpios  = <&cps_gpio1 26 GPIO_ACTIVE_HIGH>;
+};
+
+p0_phy: ethernet-phy@0 {
+	compatible = "ethernet-phy-ieee802.3-c45";
+	pinctrl-names = "default";
+	pinctrl-0 = <&cpm_phy0_pins &cps_phy0_pins>;
+	reg = <0>;
+	interrupt = <&cpm_gpio2 18 IRQ_TYPE_EDGE_FALLING>;
+	sfp = <&sfp_eth0>;
+};
+
+&cpm_eth0 {
+	phy = <&p0_phy>;
+	phy-mode = "10gbase-kr";
+};
diff --git a/Bindings/net/smsc-lan87xx.txt b/Bindings/net/smsc-lan87xx.txt
index 974edd5c85cc..8b7c719b0bb9 100644
--- a/Bindings/net/smsc-lan87xx.txt
+++ b/Bindings/net/smsc-lan87xx.txt
@@ -15,7 +15,6 @@ smsc phy with disabled energy detect mode on an am335x based board.
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
 
 	ethernetphy0: ethernet-phy@0 {
 		reg = <0>;
diff --git a/Bindings/net/socfpga-dwmac.txt b/Bindings/net/socfpga-dwmac.txt
index 2e68a3cd8513..b30d04b54ee9 100644
--- a/Bindings/net/socfpga-dwmac.txt
+++ b/Bindings/net/socfpga-dwmac.txt
@@ -40,7 +40,6 @@ gmii_to_sgmii_converter: phy@0x100000240 {
 gmac0: ethernet@ff700000 {
 	compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
 	altr,sysmgr-syscon = <&sysmgr 0x60 0>;
-	status = "disabled";
 	reg = <0xff700000 0x2000>;
 	interrupts = <0 115 4>;
 	interrupt-names = "macirq";
diff --git a/Bindings/net/sti-dwmac.txt b/Bindings/net/sti-dwmac.txt
index d05c1e1fd9b6..062c5174add3 100644
--- a/Bindings/net/sti-dwmac.txt
+++ b/Bindings/net/sti-dwmac.txt
@@ -34,7 +34,6 @@ Example:
 
 ethernet0: dwmac@9630000 {
 	device_type = "network";
-	status = "disabled";
 	compatible = "st,stih407-dwmac", "snps,dwmac", "snps,dwmac-3.710";
 	reg = <0x9630000 0x8000>;
 	reg-names = "stmmaceth";
diff --git a/Bindings/net/stm32-dwmac.txt b/Bindings/net/stm32-dwmac.txt
index c35afb7e956a..489dbcb66c5a 100644
--- a/Bindings/net/stm32-dwmac.txt
+++ b/Bindings/net/stm32-dwmac.txt
@@ -18,7 +18,6 @@ Example:
 
 	ethernet@40028000 {
 		compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
-		status = "disabled";
 		reg = <0x40028000 0x8000>;
 		reg-names = "stmmaceth";
 		interrupts = <0 61 0>, <0 62 0>;
diff --git a/Bindings/net/wireless/brcm,bcm43xx-fmac.txt b/Bindings/net/wireless/brcm,bcm43xx-fmac.txt
index 590f622188de..b2bd4704f859 100644
--- a/Bindings/net/wireless/brcm,bcm43xx-fmac.txt
+++ b/Bindings/net/wireless/brcm,bcm43xx-fmac.txt
@@ -29,7 +29,6 @@ mmc3: mmc@01c12000 {
 	vmmc-supply = <&reg_vmmc3>;
 	bus-width = <4>;
 	non-removable;
-	status = "okay";
 
 	brcmf: wifi@1 {
 		reg = <1>;
diff --git a/Bindings/net/wireless/esp,esp8089.txt b/Bindings/net/wireless/esp,esp8089.txt
index 19331bb4ff6e..6830c4786f8a 100644
--- a/Bindings/net/wireless/esp,esp8089.txt
+++ b/Bindings/net/wireless/esp,esp8089.txt
@@ -21,7 +21,6 @@ Example:
 	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;
 	non-removable;
-	status = "okay";
 
 	esp8089: sdio_wifi@1 {
 		compatible = "esp,esp8089";
diff --git a/Bindings/net/wireless/marvell-8xxx.txt b/Bindings/net/wireless/marvell-8xxx.txt
index 0854451ff91d..59de8646862d 100644
--- a/Bindings/net/wireless/marvell-8xxx.txt
+++ b/Bindings/net/wireless/marvell-8xxx.txt
@@ -48,7 +48,6 @@ IRQ pin 38 is used as system wakeup source interrupt. wakeup pin 3 is configured
 so that firmware can wakeup host using this device side pin.
 
 &mmc3 {
-	status = "okay";
 	vmmc-supply = <&wlan_en_reg>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;
diff --git a/Bindings/net/wireless/ti,wlcore.txt b/Bindings/net/wireless/ti,wlcore.txt
index 7b2cbb14113e..f42f6b0f1bc7 100644
--- a/Bindings/net/wireless/ti,wlcore.txt
+++ b/Bindings/net/wireless/ti,wlcore.txt
@@ -31,7 +31,6 @@ clock, new bindings (for parsing the clock nodes) have to be added.
 Example:
 
 &mmc3 {
-	status = "okay";
 	vmmc-supply = <&wlan_en_reg>;
 	bus-width = <4>;
 	cap-power-off-card;
diff --git a/Bindings/net/xilinx_axienet.txt b/Bindings/net/xilinx_axienet.txt
new file mode 100644
index 000000000000..38f9ec076743
--- /dev/null
+++ b/Bindings/net/xilinx_axienet.txt
@@ -0,0 +1,55 @@
+XILINX AXI ETHERNET Device Tree Bindings
+--------------------------------------------------------
+
+Also called  AXI 1G/2.5G Ethernet Subsystem, the xilinx axi ethernet IP core
+provides connectivity to an external ethernet PHY supporting different
+interfaces: MII, GMII, RGMII, SGMII, 1000BaseX. It also includes two
+segments of memory for buffering TX and RX, as well as the capability of
+offloading TX/RX checksum calculation off the processor.
+
+Management configuration is done through the AXI interface, while payload is
+sent and received through means of an AXI DMA controller. This driver
+includes the DMA driver code, so this driver is incompatible with AXI DMA
+driver.
+
+For more details about mdio please refer phy.txt file in the same directory.
+
+Required properties:
+- compatible	: Must be one of "xlnx,axi-ethernet-1.00.a",
+		  "xlnx,axi-ethernet-1.01.a", "xlnx,axi-ethernet-2.01.a"
+- reg		: Address and length of the IO space.
+- interrupts	: Should be a list of two interrupt, TX and RX.
+- phy-handle	: Should point to the external phy device.
+		  See ethernet.txt file in the same directory.
+- xlnx,rxmem	: Set to allocated memory buffer for Rx/Tx in the hardware
+
+Optional properties:
+- phy-mode	: See ethernet.txt
+- xlnx,phy-type	: Deprecated, do not use, but still accepted in preference
+		  to phy-mode.
+- xlnx,txcsum	: 0 or empty for disabling TX checksum offload,
+		  1 to enable partial TX checksum offload,
+		  2 to enable full TX checksum offload
+- xlnx,rxcsum	: Same values as xlnx,txcsum but for RX checksum offload
+
+Example:
+	axi_ethernet_eth: ethernet@40c00000 {
+		compatible = "xlnx,axi-ethernet-1.00.a";
+		device_type = "network";
+		interrupt-parent = <&microblaze_0_axi_intc>;
+		interrupts = <2 0>;
+		phy-mode = "mii";
+		reg = <0x40c00000 0x40000>;
+		xlnx,rxcsum = <0x2>;
+		xlnx,rxmem = <0x800>;
+		xlnx,txcsum = <0x2>;
+		phy-handle = <&phy0>;
+		axi_ethernetlite_0_mdio: mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phy0: phy@0 {
+				device_type = "ethernet-phy";
+				reg = <1>;
+			};
+		};
+	};